Advertisement
Quick Links
TV Stand Instruction Manual
Website:
www.perlesmith.com
Model：PSTVS21
Thank you for choosing this PERLESMITH product! At
PERLESMITH we strive to provide you with the best quality
products and services in the industry. Please share your
experience of our product with others at
www.perlesmith.com/pages/reviews if you are satisfied.
Should you have any issues, please don't hesitate to contact
us.
Technical Support:
1-800-556-6806 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
supportus@perlesmith.com (US）
supportca@perlesmith.com (CA)
V1.0
Advertisement
Related Manuals for Perlesmith PSTVS21
Summary of Contents for Perlesmith PSTVS21
- Page 1 V1.0 Model：PSTVS21 Thank you for choosing this PERLESMITH product! At PERLESMITH we strive to provide you with the best quality products and services in the industry. Please share your experience of our product with others at www.perlesmith.com/pages/reviews if you are satisfied.
- Page 2 If your TV VESA is greater than 600x400 mm/24x16 in. or less than VESA 100x100mm/4x4in., this TV stand is NOT compatible. If this TV stand is NOT compatible, please contact customer service at suppor- tus@perlesmith.com (US)/supportca@perlesmith.com (CA) to find a compatible product. Tools Needed [Not Included]...
- Page 3 Do not use damaged or defective parts. lf you require replacement parts, contact our Product Support line at 1-800-556-6806 or customer service at supportus@per- lesmith.com (US)/supportca@perlesmith.com (CA) • Please note: Not all hardware included in this package will be used. Supplied Parts and Hardware for Step 1...
- Page 4 Supplied Parts and Hardware for Step 3 （H）x2 Wire Clip Supplied Parts and Hardware for Step 4 (05) x2 (TV6) x4 (TV7) x4 TV Bracket Washer φ8.5 Washer Note: The bolts and spacers are shown in accordance with the actual size (TV1) x4 (TV2) x4 M6x15mm...
-
Page 5: Step 1 Assemble The Base
Supplied Parts and Hardware for Step 5 (G) x2 Safety Lock Step 1 Assemble the Base Place foot pads [F] to the painted side of the tempered glass base Step 1-1 [01] in the corners Note：Kindly note that the tempered glass base is designed to show the shiny glass side facing up Step 1-2 Connect the support pillar [02] to tempered glass base [01]... - Page 6 Step 2 Connect the TV Plate [04] to Support Pillar [02] Note: There are three choices for The First Choice height adjustment. You can choose The Second Choice your desired height position while connecting the swivel component The Third Choice [06] and TV plate [04] to support pillar [02].
- Page 7 -Too short will not hold the TV. -Too long will damage the TV. Too Short Too Long Correct Correct Note: If necessary, the spacers can be used in multi-layer. If the installation fails after trying various methods, please contact customer service at supportus@perlesmith.com (US)/supportca@perlesmith.com (CA).
- Page 8 CAUTION: Ensure the TV brackets [05] are EQUALLY CENTERED on your TV and securely fastened in place. PLEASE NOTE: The bolt hole locations on your TV may vary in accordance of the manufactur- ers design of the TV. We are only illustrating possible loca- tions of the bolt holes.
- Page 9 Option C (For Round Back TV) The spacers must be used with washers (TV7) to stop spacers from falling down. TV2/TV4/TV5 TV8/TV9/TV10 Option D (For TV with A “Bump”) Spacers may be necessary for 2 holes ONLY. The spacers must be used with washers (TV7) to stop spacers from falling down. TV2/TV4/TV5 TV8/TV9/TV10 Alternate Spacer Setups...
- Page 10 Option E Alternate Spacer Setups For cable interference or inset holes, use spacers [TV8], [TV9] and [TV10] to create extra space between the TV and TV brackets The spacers must be used with washers (TV7) to stop spacers from falling down. TV2/TV4/TV5 TV8/TV9/TV10 Alternate Spacer Setups...
- Page 11 “Be gentle” Insert the safety locks [G] into the upward facing hooks at the midway to lower part of the TV bracket. Then tighten the bolts of the safety locks [G] until the bolts touch the TV plate.
- Page 12 Step 6 Adjust Swivel Angle of TV Stand If necessary，the TV plate or TV can be swivelled manually.