Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CAS DL Series
Summary of Contents for CAS DL Series
- Page 1 DL Series DOLBO Simple Weighing Scale OWNER’S MANUAL 9002-DL1-0033-0 2005. 9...
-
Page 2: Table Of Contents
CONTENTS PRECAUTIONS PREFACE NAMES AND FUNCTIONS INSTALLATIONS OPERATIONS 1. General Weighing 2. Weighing with Tare 3. Changing Unit of Weight 4. HOLD Function 5. Comparator Function 6. Counting Function 7. AUTO Power Off Function BATTERY MAINTENANCE ERROR MESSAGE SPECIFICATIONS... -
Page 3: Precautions
PRECAUTIONS Make sure that you plug your scale into the proper power outlet. Plug into a power outlet 30 minutes before operations. If the scale is not properly level, please adjust the 4 legs at the bottom of the scale (turn legs clockwise or counterclockwise) so as to center the bubble of the... -
Page 4: Preface
CAS products. We believe that your needs will be satisfied and you will have reliability. This manual will help you with proper operation and care of the DL series. Please keep this handy for future reference. NAMES AND FUNCTIONS... -
Page 5: Installations
INSTALLATIONS OPERATIONS Turn on the display by pressing the ON/OFF key. Then the display will show all the segments and count up "0" to "9". You may stop this automatic counting by pressing the ZERO key. When you turn on the display, make sure that platter is empty. Otherwise, display will show "Err", an error of initial zero range. -
Page 6: Weighing With Tare
2. Weighing with Tare 4. HOLD Function TARE means the weight of container being used for a commodity. When the weight is not stable, press the MODE key. The display shows the “HOLd” and then press ZERO key. TARE key function is to subtract the weight of the container from full weight loaded. -
Page 7: Counting Function
6. Counting Function Counting without Tare Press the MODE key to have Press ZERO key to set up HIGH If you set up HIGH limit you number increase. To move limit. The display shows can go out by pressing ZERO flash to next digit, press "0.00"... -
Page 8: Auto Power Off Function
7. Auto Power Off Function Counting with Tare Auto-Power off function is to automatically power off as time is set. This function is helpful to save battery, which is not in use. The following is the setting procedure of Auto-power off. Press MODE key twice to go to Put the container on the If the number of selected... -
Page 9: Battery Maintenance
An error of the initial zero range 365 620 730mm 420 655 710mm DIMENSIONS Try to turn OFF and ON the scale. Init Problems on Analog Module Call your CAS dealer if still problems. 355 465mm 395 520mm PLATTER SIZE 18kg 15kg WEIGHT... - Page 10 MEMO MEMO...
- Page 11 MEMO...
Need help?
Do you have a question about the DL Series and is the answer not in the manual?
Questions and answers