Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CAS DB-II
Summary of Contents for CAS DB-II
- Page 1 Bench Scale OWNER’S MANUAL (VFD Ver.) 9002-DB2-VF33-3 2006. 07...
-
Page 2: Table Of Contents
CONTENTS PRECAUTIONS PREFACE NAMES AND FUNCTIONS OPERATIONS 1. General Weighing 2. Weighing with Tare 3. Counting Mode 4. Percent Weighing Mode 5. Hold Function 6. Cumulative Weight Sum 7. Weight Comparison Function(HI/OK/LOW) 8. Print Out SETUP MODE 1. How to Go to Setup Mode 2. -
Page 3: Precautions
Internal mechanism could be damaged. moving. Do not hold by the platter. defect occurs, contact defect or electric shock. CAS authorized dealer. your CAS authorized dealer immediately for proper repair. Do not pull the plug by its cord when... -
Page 4: Preface
DISPLAY AND KEYBOARD PREFACE Thank you for purchasing our CAS DB- series scale. These series have been designed with CAS reliability, under rigid quality control and with outstanding performance. Your specialty departments can enjoy these high quality reliable CAS products. -
Page 5: Operations
KEYS DESCRIPTIONS PRINT key. [ ] Used to have number down. To release the TARE function, remove an item and container Used to turn ON or OFF the power. from the platter and press the TARE key. POWER 3. Counting Mode OPERATIONS If you want to count parts, first you have to set sample size. -
Page 6: Percent Weighing Mode
“LOW”, it is impossible to count samples because the unit weight is too small. (Refer to Table 1) Model DB-II 60 kg DB-II 150kg DB-II 300kg Place an item on the platter, then the weight is displayed as a... -
Page 7: Weight Comparison Function(Hi/Ok/Low)
7. Weight Comparison Function(HI/OK/LOW) 7-1. How to compare weight The display shows cumulative weight sum and aggregate times every time pressing the SET key. The SUM key is flashed. Press the MODE key until Press the HOLD key to Press the SET key to set up the display shows “WL OFF”. - Page 8 Suppose that the High limit of 70kg and the Low limit of 30kg are set up. In this condition, OK lamp is lighted on if the weight is 40kg, HI lamp is lighted on if the weight is 80kg and if the weight is 20kg, LO lamp is lighted on.
-
Page 9: Print Out
SET key, you will save current setting and finish this mode. To finish this ======== WEIGHT ======== ======== COUNT ======== mode without saving, press the ZERO key. WELCOME TO CAS[DB-2] CAS WELCOME TO CAS[DB-2] CAS 2000-00-00 00:00:00 2000-00-00 00:00:00 Weight : 0.000 kg... -
Page 10: How To Enter Date
MENU DISPLAY DESCRIPTIONS “ dy on ” Print out date /day. Date “ dy oFF ” Do not print out date /day. “ ti on ” Print out time. Time “ ti oFF ” Do not print out time. “ LA off ” Do not print out label caption. -
Page 11: Error Messages
2. Make sure there is a platter on the Err 1 30kg/0.01kg 60kg/0.02kg 150kg/0.05kg scale. CAPACITY 60kg/0.02kg 150kg/0.05kg 300kg/0.1kg Err 10 Failure of analog module Call your CAS dealer MAX.TARE 59.98kg 149.95kg 299.9kg Err 11 An error of EEPROM Call your CAS dealer INTERNAL RESOLUTION 1/120,000 1/150,000 1/150,000... -
Page 12: How To Install Db - Series
HOW TO INSTALL DB-II Series MEMO POST PIPE INDICATOR POST BRACKET POST KNOB WIRE FIG.1 POST PIPE LOAD CELL WIRE POST BRACKET LEVELING GAUGE BOLT FIG.2 PLATFORM ADJUST FIG.3 1. Open the box with care because indicator is connected to the scale with load cell wire.
Need help?
Do you have a question about the DB-II and is the answer not in the manual?
Questions and answers