Advertisement
ASSEMBLING THE BED KIT COMPONENTS (CONTINUED)
7. Layout and adjust your design. Align boards so brackets
interlock as shown. If applicable, square the bed kit.
Consult the Squaring the Bed instructions presented
earlier.
8. Once desired layout is achieved, boards are level, and
raised bed is square, slide stakes through the holes in the
interlocked brackets and drive into ground until tops are
level with the composite boards.
ATTENTION: If the raised bed is a multi-tiered design,
slide a second stake into the top of each installed stake
(7a). Slide a second tier of sideboards over the stakes (7b).
Repeat for additional tiers.
9. Once bed kit is assembled, insert the supplied stake caps
into the tops of the stakes until they snap in place. Tap with
a mallet if needed.
6
Stake
8
Cap
Revision date: 06.21.19
7a
RAISED BED KITS
5
7b
Ground
Level
5
Advertisement
