About The Indicator Lamps - Daikin MC30YVM Operation Manual

Hide thumbs Also See for MC30YVM:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

About the Indicator Lamps

Operating/Indicator panel
Check the indicator lamps and respond as indicated below.
Indicator lamp
MODE lamp is blinking.
Streamer lamp is blinking. It is time to replace the Streamer unit.
ON-OFF Lamp Blinking.
All 3 FAN lamps are
blinking simultaneously.
This lamp blinks if the deodorising fi lter unit has been detached or
is not attached properly.
 Attach the deodorising fi lter unit properly. ►Page 14
 Contact the place to purchase.
An electrical component is faulty.
 Contact the place of purchase.
 If all parts are attached
Are the pre-fi lters
and dust collection
fi lter attached?
These lamps may
 If one or more components are not
blink if the unit is
operated without a
part attached
 If there is no dust buildup
Is there a buildup
 If there is a dust buildup
of dust on the
pre-fi lter?
 If the air outlet is not blocked
Is the air outlet
blocked?
 If the air outlet is blocked
These lamps may blink if there is a sudden drop in voltage.
If none of the conditions above occurs,
 Contact the place of purchase. It is recommended to unplug
the unit until the service agent is arrive.
WARNING
Before cleaning and maintenance work, make sure to
unplug the unit. (An electric shock or injury may result)
Cause/Solution
An electrical component is faulty.
 Contact the place of purchase.
attached
Remove the power supply plug, reattach
the parts and then turn the unit on again.
An electrical component is faulty.
 Contact the place of purchase.
Remove the power supply plug, clean
the pre-fi lter and then turn the unit on
again. ►Page 13
An electrical component is faulty.
 Contact the place of purchase.
Remove any obstacles blocking the air
outlet and then turn the unit on again.
Troubleshooting
16

Advertisement

Table of Contents
loading

Table of Contents