Troubleshooting
About the Indicator Lamps
Operating/Indicator panel
Check the indicator lamps and respond as indicated below.
Indicator lamp
Odour sensor lamp is
blinking.
Streamer sensor lamp is
blinking.
All 3 MODE lamps are
blinking simultaneously.
All 4 FAN lamps are
blinking simultaneously.
17
This lamp blinks if the deodorising filter unit has become detached or is not attached properly.
Attach the deodorising fi lter unit properly.
It is time to replace the streamer unit.
An electrical component is faulty.
Contact the place of purchase.
Are the pre-fi lter, outfl ow grille,
and dust collection fi lter attached?
These lamps may blink if the unit
is operated without a part
attached.
Is there a buildup of dust on the
pre-filter?
Is the air outlet blocked?
These lamps may blink if there is a sudden drop in voltage.
Cause/Solution
►Page 14
►Page 15
If all parts are attached
An electrical component is faulty.
Contact the place of purchase.
If one or more components are not attached
Remove the power supply plug, reattach the parts
and then turn the unit on again.
If there is no dust buildup
An electrical component is faulty.
Contact the place of purchase.
If there is a dust buildup
Remove the power supply plug, clean the pre-fi lter
and then turn the unit on again.
If the air outlet is not blocked
An electrical component is faulty.
Contact the place of purchase.
If the air outlet is blocked
Remove any obstacles blocking the air outlet and
then turn the unit on again.
►Page 13