Daikin MC30YVM Operation Manual page 20

Troubleshooting
Troubleshooting
Phenomenon
All the FAN lamps are blinking
together.
Sometimes the Streamer lamp
does not light up
The Streamer lamp blinks
The MODE lamp blinks
19
Check points
• Are the pre-fi lters and dust collection fi lter attached?
These lamps may blink if the unit is operated without a
part attached.
[If one or more parts are not attached]
 Remove the power supply plug, reattach the parts and then
turn the unit on again.
[If all parts are attached]
An electrical component is faulty.
 Contact the place of purchase.
• Is there a buildup of dust on the pre-fi lters?
[If there is a dust buildup] ►Page 13
 Remove the power supply plug, clean the pre-fi lters and
then turn the unit on again.
[If there is no dust buildup]
An electrical component is faulty.
 Contact the place of purchase.
• Is the air outlet blocked?
[If the air outlet is blocked]
 Remove any obstacles blocking the air outlet and then turn
the unit on again.
[If the air outlet is not blocked]
An electrical component is faulty.
 Contact the place of purchase.
The lamps may blink if there is a sudden voltage fl uctuation.
The lamps will return to their previous condition once voltage
returns to normal.
Voltage range protection: 198V – 264V.
• If none of the conditions above occurs,
 Contact the place of purchase. It is recommended to unplug
the unit until the service agent is arrive.
• The Streamer may stop operation depending on the time
control.
Streamer lamp turns off when the Streamer stop operating.
• Streamer is recommended to be replaced.
 Contact the place of purchase.
• Is the deodorising fi lter unit attached?
 Attach the deodorising fi lter unit. ►Page 14