About The Indicator Lamps; Troubleshooting - Daikin MC30YPVM Operation Manual

About the Indicator Lamps

Operating/Indicator panel
Check the indicator lamps and respond as indicated below.
Indicator lamp
MODE lamp is
blinking.
Streamer lamp is
blinking.
ON-OFF lamp Blinking.
All 3 FAN lamps are
blinking
simultaneously.
This lamp blinks if the deodorising fi lter unit has been detached or is not
attached properly.
 Attach the deodorising fi lter unit properly. ►Page 14
It is time to replace the Streamer unit.
 Contact the place to purchase.
An electrical component is faulty.
 Contact the place of purchase.
Are the pre-fi lters and dust
collection fi lter attached?
These lamps may blink if the
unit is operated without a
part attached.
Is there a buildup of dust on
the pre-fi lters?
Is the air outlet blocked?
These lamps may blink if there is a sudden drop in voltage.
If none of the conditions above occurs,
 Contact the place of purchase. It is recommended to unplug the unit until the
service agent is arrive.
WARNING
Before cleaning and maintenance work, make sure to
unplug the unit. (An electric shock or injury may result)
Cause/Solution
 If all parts are attached
An electrical component is faulty.
 Contact the place of purchase.
 If one or more components are not
attached
Remove the power supply plug, reattach the
parts and then turn the unit on again.
 If there is no dust buildup
An electrical component is faulty.
 Contact the place of purchase.
 If there is a dust buildup
Remove the power supply plug, clean the
pre-fi lter and then turn the unit on again.
►Page 13
 If the air outlet is not blocked
An electrical component is faulty.
 Contact the place of purchase.
 If the air outlet is blocked
Remove any obstacles blocking the air
outlet and then turn the unit on again.

Troubleshooting

16