3onedata IPS7110-2GC-4POE Series User Manual
  1. Manuals
  2. Brands
  3. 3onedata Manuals
  4. Switch
  5. IPS7110-2GC-4POE Series
  6. User manual

3onedata IPS7110-2GC-4POE Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IPS7110（&IPS716）-2GC-4POE series
Managed Industrial PoE switches
CLI user manual
Version 2.0.0, Mar. 2017
www.3onedata.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IPS7110-2GC-4POE Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for 3onedata IPS7110-2GC-4POE Series

Summary of Contents for 3onedata IPS7110-2GC-4POE Series

  • Page 1 IPS7110（&IPS716）-2GC-4POE series Managed Industrial PoE switches CLI user manual Version 2.0.0, Mar. 2017 www.3onedata.com...
  • Page 2 IPS7110-2GC-4POE series  Trademarks Notice is registered trademarks of Shenzhen 3onedata Technology Co.,Ltd. All other trademarks or registered marks in this manual belong to their respective manufacturers. Agreement As the product version upgrades or other reasons, this document is subject to change without notice.
  • Page 3 CLI user manual Special attention www.3onedata.com...

  • Page 4: Table Of Contents

    5.3 IGMP query mode enable ............................ 19 5.4 Set IGMP query time............................. 19 5.5 Check the MAC address table..........................20 Chapter 6 VLAN ................................21 6.1 Introduction to VLAN ............................. 21 6.2 The contents of VLAN configuration ........................21 www.3onedata.com...
  • Page 5 Chapter 13 Port Statistics ............................... 37 13.1 Enter the port statistical configuration view ..................... 37 13.2 Port Statistics configuration view ........................37 Chapter 14 Port mirroring ............................... 38 14.1 Enter the port mirroring view ..........................38 14.2 Port mirroring configuration / delete ......................... 38 www.3onedata.com...
  • Page 6 16.3 Configure PoE port maximum power, priority and POE total power ............43 16.4 View port POE status information ........................44 Chapter 17 LLDP Setting ..............................44 17.1 Enter LLDP settings view ........................... 44 17.2 LLDP configuration and display ........................45 www.3onedata.com...

  • Page 7: Chapter 1 Login Ethernet Switch

    The RS-232 port is connected to the computer. To take Hyper Terminal in Windows XP for example, as shown in Figure 1.1.3, type in a new name of the connection in a text box named "name", then click "OK" button. www.3onedata.com...
  • Page 8 3) Set serial port parameters. As shown in Figure 1.1.5, set the “Bits per second” in the “Properties” of serial port is 115200bit/s, “Data bits” is 8, “parity” is None, “Stop Bits” is 1, “Flow Control” is None. Click “OK” button to enter to “Hyper Terminal” Window. www.3onedata.com...
  • Page 9 4) Hyper terminal attribute. In the Hyper Terminal window select [document / property / setting] into the attributes settings window. Select the terminal simulation of type VT100 or automatic detection, click < OK > button to return to the hyper terminal window. (Figure 1.1.6) www.3onedata.com...

  • Page 10: Configuration Through Telnet

    1） Establish configuration environment, just connect PC’s Ethernet port connect to the switch’s Ethernet port through Local area network. (Figure 1.2.1) 2） Run the Telnet program on the PC, need to input“Telnet+ Space+ switch’s IP address” for checking, Figure 1.2.2 as follows: (Figure 1.2.2) www.3onedata.com...

  • Page 11: Agreement

    4） Use command to configure the switch and check the running statues, if need help, please input“?” time. Specific configuration command, please reference“IPS7110-2GC-4POE series CLI user manual”. 1.3 Agreement Command line format agreement table 1.3.1 as follow Table 1.3.1 Format Description Bold Key words of the command show by bold type.

  • Page 12: Command Line Port

    “help or ?” in “switch”, enter into system view, Under the view of system, corresponding view appears after typing indifferent command, figure 1.4.1 as follows: (Figure 1.4.1) www.3onedata.com...
  • Page 13 Show or modify value QoS_config# of Qos, Tos, like Qos, Tos etc. Show or modify Ring Ring# Ring Ring information, like Ring id,Ring port, etc. Show or modify port Port_Trunk# Trunk Trunking trunking information, setting like trunking information. www.3onedata.com...

  • Page 14: Command Lines Online Help

    --Enter port setting menu Bandwidth <dir> --Enter bandwidth management menu Igmp <dir> --Enter igmp snooping menu Lldp <dir> --Enter lldp setting menu Vlan <dir> --Enter vlan menu <dir> --Enter QoS menu Ring <dir> --Enter Ring menu Trunk <dir> --Enter Trunking setting menu www.3onedata.com...

  • Page 15: Frequent Incorrect Information Of Command Lines

    All commands typed by users, if it is certificated by grammar, it can run correctly, or users will be sent incorrect information. Frequent incorrect information is in table 1.4.3 as below: Table 1.4.3 Frequent incorrect information English incorrect information Reason www.3onedata.com...

  • Page 16: History Command

    Table 1.4.5 general command Operating Result List commands of current menu List Help commands of current Help menu In any mode can be executed Quit from CLI Quit Exit from current menu Exit Reboot switch Reboot www.3onedata.com...

  • Page 17: Chapter 2 Device System Based Information Configuration

    Carry out under the view of device information Example: Enter into device information view, enter the bold type command as follows and enter return Switch# information Switch(information)# show others Device type MangedSwitch Device name IndustrialSwitch Description 10PORT Serial number Contact way www.3onedata.com...

  • Page 18: Configuration Information

    Contact Clean -c information information Example: Delete device name, enter the bold type command as follows and enter return key: Switch(information)# clean -n [OK] Example: Delete Serial Number, enter the bold type command as follows and enter return key: www.3onedata.com...
  • Page 19 CLI user manual Switch(information)# clean -m [OK] Example: Delete Contact information, enter the bold type command as follows and enter return key: Switch(information)# clean -c [OK] www.3onedata.com...

  • Page 20: Chapter 3 Port Configuration

    5 100M FULL Link 3.3 Port configuration Port configuration including: 1 To enable or disable the port; 2 Configure the port speed and duplex mode; 3 The allocation of port flow control; 4 Remove the statistics information of port frame; www.3onedata.com...

  • Page 21: To Enable Or Disable The Port

    Table 3.6.1 Operating Command Description Enable port flow control Flow-con <portlist> enable <portlist>:1,3,5-10 or all Disable port flow control Flow-con <portlist> disable <portlist>:1,3,5-10 or all Example: open port 3, 4, 5 flow control Switch （Port）# flow-con 3,4,5 enable [OK] www.3onedata.com...

  • Page 22: Chapter 4 Bandwidth Management

    Note: only the Gigabit Ethernet port can be set larger than the bandwidth of 8M Example: set the 1 port of egress bandwidth is 8M Switch (Bandwidth) # config egrate 1 8M [OK] Example: set port egress bandwidth limit 0 Switch (Bandwidth) # config egrate 1 0 [OK] www.3onedata.com...

  • Page 23: Ingress Bandwidth Configuration

    Display Egress bandwidth Show egrate <portlist> <portlist>:1,3,5-10 or all information Show type of ingress limit packets Show intype <portlist> <portlist>:1,3,5-10 or all Example: display port information 1, 2, 3 Ingress bandwidth Switch(Bandwidth)# show inrate 1-3 Normal Medium High www.3onedata.com...
  • Page 24 CLI user manual port 1 port 2 port 3 unlimited unlimited unlimited unlimited www.3onedata.com...

  • Page 25: Chapter 5 Igmp

    IGMP query enable set Set query{enable|disable} Example: Switch(IGMP)# Set query enable [OK] 5.4 Set IGMP query time Table 5.4.1 set IGMP query time: Table 5.4.1 Operating Command Description IGMP query time setting query{time} Time: 60-1000 Example: Switch(IGMP)# Query 125 [OK] www.3onedata.com...

  • Page 26: Check The Mac Address Table

    Show MAClist Example: Switch(Igmp)# show MAClist IGMP Snooping query time 125 seconds [ 1] MAC List: 01-00-5E-00-00-FB Port: 5 [ 2] MAC List: 01-00-5E-00-00-FC Port: 5 [ 3] MAC List: 01-00-5E-7F-FF-FA Port: 5,6 [ 4] MAC List: 01-00-5E-00-00-FD Port: 5 www.3onedata.com...

  • Page 27: Chapter 6 Vlan

    Description Show 802.1Q VLAN items Show vlan<vidlist> --vid_list Example:1,4,5-4095 or all Show pvid -Portlist Example:1,3,5-10 or all, 0 --CPU Show port VID port <portlist> Show type<portlist> -Portlist Example:1,3,5-10 or all, 0 --CPU Show port type (Trunk or Access) port www.3onedata.com...

  • Page 28: Enter The Port Configuration View Based On Vlan

    : ---- port 7 : ---- port 8 : ---- port 9 : ---- port10 : ---- Tip: This configuration will be validated after restarting Switch(Vlan)# Show Vlan ALL Port_cpu VID: UT UT UT UT UT UT UT VID: www.3onedata.com...

  • Page 29: Enter Configuration View Based On 802.1Qvlan

    <pvid>:1,3,5-10 or all 0 --CPU port config type <portlist> Port Type setting <portlist>:1,3,5-10 or all {Trunk|Access} Example: setting port 2, 3 and 4 PVID is 3 Switch(Vlan)# Config Pvid 2-4 3 [OK] Tip: This configuration will be validated after restarting www.3onedata.com...

  • Page 30: Chapter 7 Static Multicast Filtering View

    User can use the following commands to check static multicast address. Table 7.3.1 Shows static multicast address command: Operating Command Description Show static multicast Show multicast Run in view of multicast filtrated address Switch(Multicast)# Show multicast （1） MAC: 01-22-33-44-55-66 Port: 1, 2, 3 www.3onedata.com...

  • Page 31: Chapter 8 Qos

    The user can use the following command to configure the QoS queue mechanism. Table 8.3.1 QoS queue configuration: Operating Command Description Queue 0: weight ratio (8:4:2:1) Queuingm {0|1} configuration 1: high priority priority Example: set the QoS queue mechanism to weight ratio (8:4:2:1) Switch (QoS) # queuingm 0 [OK] www.3onedata.com...

  • Page 32: The Value Of Dscp/Tos Mapping

    Show queuingm mechanism To view the CoS value map Show cos <coslist> <coslist>:CoS Mapping value,0,1,2-7 <dscplist>:Dscp Mapping To view the ToS value map Show Tos <dscplist> value,1,2,3-64 To view the ToS/CoS enabled Show state <portlist> <portlist>:port 1,2,3-10 or all state www.3onedata.com...
  • Page 33 CLI user manual Operating Command Description Show default To view the default port priority <portlist>:port 1,2,3-10 or all <portlist> www.3onedata.com...

  • Page 34: Chapter 9 Ring Configuration

    Switch(Ring)# show ring Ring III Enable Group:1 ID: 1 port:1,2 type: Single Hello_time: 0*100ms state:Disable Group:2 ID: 2 port:3,4 type: Single Hello_time: 0*100ms state:Disable 9.4 The Ring3 configuration Ring3 enabled, can use the following command to set the Ring3. www.3onedata.com...

  • Page 35: The Rstp Configuration

    Example: to modify the first groups in SWRing3 ring network ports 5, 6 Switch(Ring)# modify 1 -p 5,6 [OK] Tip: This configuration will be validated after restarting 9.5 The RSTP configuration RSTP enabled, can use the following command to set the RSTP. Table 9.5.1 RSTP to set and modify. www.3onedata.com...
  • Page 36 --modify delaytime Range [4-30]s --modify maxage Range Modify the RSTP port [6-40]s <options> --modify pathcost Range [0-200000000] Modify --modify portpriority rstp_port{1|2|3|4|5|6|7|8|G1|G2}<options> {0|16|32|48|64|80|96|112|128| <parameter> 144|160|176|192|208|224|240} --modify p2p {no|yes|auto} --modify edge {no|yes} --modify enable {no|yes} Example: RSTP port configuration Switch(Ring)#Enable 4 www.3onedata.com...
  • Page 37 Tip: This configuration will be validated after restarting Switch(Ring)# Config rstp_port 1 20000 128 auto yes yes [OK] Tip: This configuration will be validated after restarting Switch(Ring)# Modify rstp _port –c 30000 [OK] Tip: This configuration will be validated after restarting www.3onedata.com...

  • Page 38: Chapter 10 Trunk Configuration

    The user can use the following command to view port trunk configuration information. Table 10.3.1 view port trunk configuration command: Operating Command Description <trunkgroup>: Display port trunk 1, 2, 3, 4 respectively mean trunk group1, 2, Show <trunkgroup> configuration information 3, 4 all:All trunk group www.3onedata.com...

  • Page 39: Chapter 11 The Snmp Configuration

    --only read community <orcomm> name such as public The configuration read and Config <rwcomm> --read or write community <orcomm> write Snmp community name such as private <rwcomm> <snmpgw> <snmpgw> : The gateway address Switch(Snmp)# Config public private 192.168.1.1 [OK] www.3onedata.com...
  • Page 40 CLI user manual www.3onedata.com...

  • Page 41: Chapter 12 Alarm Configuration

    Example: Open Ports 1, 3, 5, 7 alarm Switch（Alarm）# port relay 1,3,5,7 enable [OK] Example: power off warning Switch（Alarm）# close alarm [OK] 12.3 Display the alarm information The user can use the following command to view the alarm information Table 12.3.1 view the alarm information command: www.3onedata.com...
  • Page 42 Port 5 Alarm status: Disable [Link] Port 6 Alarm status: Disable [Link] Port 7 Alarm status: Disable [LOS ] Port 8 Alarm status: Disable [LOS ] Port 9 Alarm status: Disable [LOS ] Port10 Alarm status: Disable [LOS ] `````` www.3onedata.com...

  • Page 43: Chapter 13 Port Statistics

    Example: the port number and types of statistics 6 Switch(Statistics)# show frames 6 InGoodOctets 243108 OutOctets 5252069 InbadOctets OutUnicast 3732 InUnicasts 2981 OutBroadCasts 18502 InBroadcasts OutMulticasts 14836 InMulticasts OutPause InPause Excessive InUndersize Collisions InFragments Deferred InOversize Single InJabber Multiple IN RxErr OutFCSErr INFCSErr Late www.3onedata.com...

  • Page 44: Chapter 14 Port Mirroring

    Example: the allocation of port 3 to collect all the data ports 1 and 2. Switch(Mirror)#config 0 1-2 3 Mirror portlist: 1,2 Collect port Watch direction: all data [OK] 14.3 Display port mirroring information Table 14.3.1 view port mirroring information command: Operating Command Description www.3onedata.com...
  • Page 45 CLI user manual Operating Command Description Display port mirroring information Show mirror In view of the port mirroring www.3onedata.com...

  • Page 46: Chapter 15 System Management

    The system after a timeout will automatically jump to the user mode, the new username and password authentication. 15.3 IP address and default gateway setting The user can set the following command equipment IP, default gateway address Table 15.3.1 device IP address, default gateway address setting: www.3onedata.com...

  • Page 47: User Name, Password Settings

    Show device IP, subnet mask, default To perform the operation in show net_address gateway the system manage Example: check the equipment IP, subnet mask, default gateway address Switch(Manage)# Show net_address Device gateway 192.168.1.1 Device mask address : 255.255.255.0 Device IP address 192.168.1.254 www.3onedata.com...

  • Page 48: Restore Factory Settings

    DNS server DNS<server> manage Switch(Manage)# DNS 202.96.134.133 15.8 Obtain an IP address automatically set Table 15.8.1 DHCP enable setting. Operating Command Description To perform the operation in the system DHCP enable setting DHCP{enable/disable} manage Switch(Manage)# DHCP enable Switch(Manage)# DHCP disable www.3onedata.com...

  • Page 49: Chapter 16 Poe Setting

    16.3 Configure PoE port maximum power, priority and POE total power Operating Command Description Port_maxpower {10W|15W|30W}:power Configure port max power {10W|15W|30W} <portlist> <portlist>:1-4 or all Priority {high|low}:high Medium Low Configuration port priority {high|medium|low}<portlist> <portlist>1-4 or all Configuration total MAX_Power <Power> <Power>:POE total power power www.3onedata.com...

  • Page 50: View Port Poe Status Information

    MAX Power: 30 W Priority : High enable : Disabled Chapter 17 LLDP Setting 17.1 Enter LLDP settings view Operating Command Description Enter LLDP settings view LLDP Execute in system view Switch# LLDP Switch(Lldp)# ? List --List commands of current menu www.3onedata.com...

  • Page 51: Lldp Configuration And Display

    Set <portlist> {0|1|2|3} --Disabled --Rx Tx --Tx only --Rx only Print remote machine's Print neighbors infomation Print lldp statistics local print local Run in view of LLDP System counters Clear lldp statistics local clear counters Switch(Lldp)# show Lldp Configuration:Enable www.3onedata.com...
  • Page 52 Tx Interval: 30 seconds Tx Hold: Tx Delay: 2 seconds Tx Reinit: 2 seconds Lldp Port Configuration: Port Mode Rx Tx Rx Tx Rx Tx Rx Tx Rx Tx Rx Tx Rx Tx Rx Tx Rx Tx Rx Tx www.3onedata.com...

This manual is also suitable for:

Ips716-2gc-4poe series

Table of Contents