3onedata IPS716-2GC-4POE Quick Installation Manual

IPS716-2GC-4POE
Managed Industrial PoE Ethernet
Switch Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili,
Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485

【Package Checklist】

Please check whether the package and accessories are intact
while using the switch for the first time.
1. Industrial Ethernet switch
3. Quick installation guide
5. DIN-Rail mounting attachment
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.

【Product Overview】

The product is managed industrial DIN-Rail PoE Ethernet
switch. The model is: IPS716-2GC-4POE (2 Gigabit Combo
Ports + 4 100M PoE Copper Ports)

【Panel Design】


Top view, Bottom view and Rear view

Front view and Side view
Nanshan District,
1. Grounding screw
2. Relay alarm output terminal block
2. Certification
3. Console port
4. Warranty card
4. Power input terminal block
6 CD
5. DIP switch
6. DIN-Rail mounting kit
7. Power supply input status indicator P1/P2
8. Relay alarm indicator ALM
9. Device running indicator RUN
10. 100M PoE copper port PoE power supply status
indicator
11. Gigabit SFP slot of Gigabit Ethernet Combo port
12. Ethernet port status indicator
13. Gigabit copper port of Gigabit Ethernet Combo port
14. 10/100Base-T(X) 100M Ethernet PoE copper port

【Mounting Dimension】

Unit: mm
Attention before mounting:
 Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
 Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
 The device surface temperature is high after running;
please don't directly contact to avoid scalding.

【DIN-Rail Mounting】

For convenient usage in industrial environments, the product
adopts 35mm DIN-Rail mounting, mounting steps as below: