3onedata IPS7112G-4GS-8GPOE Quick Installation Manual

IPS7112G-4GS-8GPOE
Managed Industrial Ethernet PoE
Switch Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili,
Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485

【Package Checklist】

Please check whether the package and accessories are intact
while using the switch for the first time.
1. Industrial Ethernet switch
3. Quick installation guide
5. CD
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.

【Product Overview】

This series are full Gigabit managed DIN-Rail industrial
Ethernet PoE switches with high performance and
cost-effectiveness. Model is IPS7112G-4GS-8GPOE (4
Gigabit SFP + 8 Gigabit PoE copper ports)

【Panel Design】


Top view, Bottom view and Rear view

Front view and Side view
Nanshan District,
1. Grounding screw
2. Relay alarm output terminal block
2. Certification
3. Console port
4. Warranty card
4. Power supply input terminal block
5. DIP switch
6. DIN-Rail mounting kit
7. Device running indicator RUN
8. Relay alarm indicator ALM
9. Power supply input status indicator P1/P2
10. POE indicator
11. Ethernet port indicator:
12. 10/100/1000Base-T(X) Gigabit PoE copper port
13. 1000Base-SFP Gigabit Ethernet SFP slot

【Mounting Dimension】

Unit: mm
Attention before mounting:
 Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power

supply specification to avoid over-voltage damaging the
device.
 The device surface temperature is high after running;
please don't directly contact to avoid scalding.

【DIN-Rail Mounting】

For convenient usage in industrial environments, the product
adopts 35mm DIN-Rail mounting, mounting steps as below: