Advertisement
Quick Links
IPS215 Series
Industrial PoE Switch User Manual
Shenzhen 3onedata Technology Co., Ltd.
Tel: +86-755-26702668 Fax: +86-755-26703485
www.3onedata.com
【Summarize】
The IPS215 series switches is a kind of unmanaged industrial PoE
switch, it support 5 Fast Ethernet ports. The 4 Fast Ethernet port
(1~4) support Power-over -Ethernet (PoE) function, another Fast
Ethernet port is 10/100MBase-T(x) RJ45 or 100M Base-FX optic
fiber. The switches are classified as power source equipment
(PSE), and when used in this way, the IPS215-4POE switches
enable centralization of the power supply, providing up to 30
watts of power per port and reducing the effort needed for
installing power. The switches can be used to power
IEEE802.3af/at standard devices (PD), eliminating the need for
additional wiring.
It support CE, FCC standard, IPS215-4POE adopt industry
standard design, IP40 protection, rugged high-strength metal case,
power
supply
input
(48VDC).
The
IEEE802.3/IEEE802.3u with 10/100M, full/half-duplex, and
MDI/MDI-X auto-sensing, providing reliable and economic
solution for your industrial Ethernet network.
【Packing list】
The industrial PoE switch is shipped with the following items. If
any of these items are missing or damaged, please contact your
customer service representative for assistance.
Industrial PoE switch ⅹ 1
User manual ⅹ 1
DIN-Rail mounting kit ⅹ 1
Warranty card ⅹ 1
【Feature】
Support 4 10/100Base-TX POE ports and 1 Fast Ethernet
port
Support
IEEE802.3,
IEEE802.3u,
IEEE802.3af/at, store and forward
Support IEEE802.3af standard, full-port (PoE) full 15.4W
power supply
- 1 -
Support IEEE802.3at standard, single-port maximum 30W
power supply.
4 Fast Ethernet port (1~4) support POE function
Ethernet port support 10/100M self-adaption
DC48V power input, reverse connection protection
IP40 protect grade, high strength iron shell, DIN Rail
installation
Industrial grade 4 design
【Panel layout】
Top and bottom panel view
switch
support
Front view
IEEE802.3x,
IPS215-4POE
Rear panel view
IPS215-F-4POE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for 3onedata IPS215-4POE
Summary of Contents for 3onedata IPS215-4POE
-
Page 1: Panel Layout
DC48V power input, reverse connection protection fiber. The switches are classified as power source equipment IP40 protect grade, high strength iron shell, DIN Rail (PSE), and when used in this way, the IPS215-4POE switches installation enable centralization of the power supply, providing up to 30... -
Page 2: Dip Switch
Ethernet interface is different. Unit (mm) but between ports 1 to port 4 cannot communication. 4 is keeping for future function. Please power off and power on when you IPS215-4POE change the status of DIP switch. 【Communication connector】 10/100Base-T(X) MDI-X (Cross over cable) -
Page 3: Led Indicator
100Base-FX full-duplex SM or MM port, SC/ST/FC type .The Wiring Requirements The PoE device is connected by fiber port must be used in pair, TX (transmit) port connect remote Cable laying need to meet the following requirements, IEEE802.3af/at standard switch’s RX(receive) port; RX(receive) port connect remote (1~4) 1. - Page 4 (2Km), wavelength: 1310nm, 1550nm EMS: EN61000-4-2 (ESD), Level 3 POE Pin-out: 1/2(+), 3/6(-) EN61000-4-4 (EFT), Level 3 Transfer distance EN61000-4-5 (Surge), Level 2 (IPS215-4POE) Twisted cable: 100M (standard CAT5/CAT5e cable) EN61000-4-5 (Surge), Level 3 (IPS215-F-4POE) Multi-mode: 1310nm, 2Km Shock: IEC 60068-2-27...
Need help?
Do you have a question about the IPS215-4POE and is the answer not in the manual?
Questions and answers