3onedata IPS215 Series Quick Installation Manual

IPS215 Series
Unmanaged Industrial PoE
Ethernet Switch
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District, Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485

【Package Checklist】

Please check whether the package and accessories are intact
while using the switch for the first time.
1 Industrial Ethernet switch 2 Quick installation guide
3 DIN-Rail mounting attachment
4 Certification 5 Warranty card
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.

【Product Overview】

This series of products are 5-port 100M unmanaged industrial
PoE Ethernet switches. Models are as follows:
Model I. IPS215-4POE (1 100M copper port + 4 100M POE)
Model II. IPS215-1F-4POE (1 100M fiber port + 4 100M
POE)

【Panel Design】

Top view, bottom view and rear view

Front View

Model I
1. Grounding screw
2. Terminal block for power input
3. DIP switch
4. DIN-Rail mounting kit
5. POE power supply status indicator （POE1-POE4）
6. Power supply indicator PWR
7. Device running indicator (RUN)
8. Ethernet interface link indicator (1-5)
9. 100M PoE port (1-4)
10. 100M copper port (Model I: port 5)
11. 100M fiber port (Model II: port 5)

【Mounting Dimension】

Unit: mm
Notice before mounting:
Don't place or install the device in area near water or

moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power

supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;

please don't directly contact to avoid scalding.

【DIN-Rail Mounting】

II
Model
The product adopts 35mm standard DIN-Rail mounting which
is suitable for most industrial scenes, mounting steps as
follows: