Operation | Dimensional Drawings - ADJ ANI-MOTION User Manual

CAUTION! When installing this device, ensure that it is mounted in a manner that will prevent
the audience from looking directly into the laser beam! Do not allow the beam to strike the
audience!
Operating Modes: This device features 2 operating modes: sound active mode and auto mode.
Sound Active Mode: This mode allows the unit to run to the beat of the music. To select this mode,
press the Mode button until the status LED located on the front of unit turns off. The device is in
sound active mode if the status LED on the front of the unit flashes at every beat or sound.
Auto Mode: There are two auto modes to choose from: slow auto mode or fast auto mode.
1. To run fast auto mode, press the Mode button until the status LED located on the front of unit
starts to flash quickly. This indicates that the device is in fast auto mode.
2. To run slow auto mode, press the Mode button until the status LED located on the front of unit
starts to flash slowly. This indicates that the device is in slow auto mode.
OPERATION
DIMENSIONAL DRAWING
13
198mm/7.8"