Hardware Installation - LeCroy USB Mobile HS User Manual

Chapter 3: Installation

3.3 Hardware Installation

USBMobileHS components and software are easily installed and quickly ready to run on
most personal computer systems. You can begin USB recordings after following these
initial steps.
Step 1 Insert the CD-ROM.
Step 2 Click NEXT when you see the Add New Hardware Wizard window.
Step 3 Follow the on-screen Plug and Play instructions.
Step 4 Click Finish when you see the message that says "Windows has finished
Step 5 Run the program Setup and follow the on-screen instructions.
Step 6 From the Help menu, select About USBMobileHS.
If the information below is present, you can record a trace:
12
installing the software that your new hardware requires" and the file
USBMobileHS.inf has been installed on your host PC.
Launch the LeCroy USBMobileHS program from the LeCroy programs group.
The main software screen opens:
• USBMobileHS Software Version
• USBMobileHS Driver Version
• BusEngine™ Version
• Unit Serial Number
USBMobileHS User Manual
LeCroy Corporation