Table of Contents
Advertisement
Chapter 4: Software Overview
The Partial Upload button is enabled when you have partially uploaded data. When you
click this button, a dialog box appears that gives you options on what portion of data you
want to upload again.
When the data is saved, the Recorded Data file appears in the main display window and
the Recording Status window is cleared.
Recording Activity
During recording, the fourth segment from the left of the Status Bar displays Recording
activity as a series of vertical bars.
The more vertical bars that are displayed, the greater the amount of activity being
recorded. If there are no vertical bars, there is no recorded activity.
During uploading, the percent of the completed upload is displayed.
Note:
Search Status
The rightmost segment displays the current search direction: Fwd (forward) or Bwd
(backward). Change the search direction from the Search Menu or double-click in the
Search Status segment.
26
•
If the recording resulted from a Trigger Event, the first packet following the
Trigger (or the packet that caused the Trigger) is initially positioned second
from the top of the display.
•
If the recording did not result from a Trigger Event, the display begins with the
first packet in the traffic file.
If packets are filtered from the recording or data are truncated, the recording
activity is reduced.
USBMobileHS User Manual
LeCroy Corporation
Advertisement
Table of Contents
