Timer Setting - Teac EX-M1 Owner's Manual

TIMER
This unit can be programmed to turn on or off at a preset time.
To set a timer (on time and off time)
1 Press the TIME MODE button once or, if the unit is on, as
many times as necessary to let both "TIMER" and "ON" or
"OFF" start blinking.
If a timer-on or a timer-off time is previously set, "TIMER" blinks
and "ON" or "OFF" shows solid.
2 Press the MEMORY/TIME SET button.
The hours start blinking.
Blinking
18
1
2
3
4

Timer Setting

1
3
4
3
4
3 Enter the necessary number of hours by pressing the
skip/TUNING buttons, and then press the MEMORY/TIME SET
button.
The minutes start blinking.
4 Similarly with the hours, enter the number of minutes by
pressing the skip/TUNING buttons, and then press the
MEMORY/TIME SET button.
The "ON" in "TIMER ON" or in "TIMER OFF" turns on solid to
indicate that a timer-on or a timer-off time has been set.
If you don't want the unit to switch itself on or off at a preset
–
time, press the TIME MODE button to get the "TIMER" in "TIMER
ON" or in "TIMER OFF" blinking, and then press the TIMER
button to get "ON" or "OFF" blinking along with "TIMER".
To have a preset timer-on or a timer-off time gone back into
effect, stop "ON" or "OFF" from blinking by pressing the TIMER
button.
2
3
4
Blinking