Setting The Timer - Teac CR-H225 Owner's Manual

STANDBY/ON
< Adjust the clock before setting the timer.
< When no action is taken for 1 minute, the timer
setting mode will be cancelled.
1
Press the TIME MODE button repeatedly until
'On time' is displayed.
'On time' appears on the display, and the 'hour'
value blinks.
2 Press the TUNING/PRESET/TIME buttons to set
the hour value, and press the ENTER button.
The 'minute' value blinks.
3
Press the TUNING/PRESET/TIME buttons to set
the minute value, and press the ENTER button.
'Off time' appears on the display, and the 'hour'
value blinks.
4 Repeat step 2 and
'Source select' appears on the display.
5 Press the TUNING/PRESET/TIME buttons to
select the source, and press the ENTER button.
Now the timer setting is stored in memory.
32

Setting the Timer

TUNING/PRESET/
TIME
ENTER
TIME MODE
3 to set the Off time.
6 Press the TIMER button on the remote control.
The timer indicator ' ' lights on the display.
7 Prepare for timer operation.
Timer Playback
Adjust the volume, tune in a station, set CD, etc.
Timer Recording
You are able to set the various external USB
storage devices such as USB flash memory to
record program at the desired time.
Connect the external USB storage device to the
unit beforehand.
Press the TIMER button on the remote
control once more.
The REC indicator lights on the display.
One minute before the set time the unit turns
on and recording begins at the set time.
< When you don't use timer, press the TIMER button
repeatedly to turn it off until the timer indicator
' ' disappears from the display.
Press the TIMER button again to turn it on.
8
Press the STANDBY/ON button to turn the unit
standby.
The standby indicator surrounding the STANBY/ON
button blinks at interval of 4 seconds.