SMC Networks ITV1000 Series Operation Manual page 2

These safety instructions are intended to prevent hazardous situations and/or equipment
damage. These instructions indicate the level of potential hazard with the labels of
"CAUTION" "WARNING" or "DANGER". To ensure safety, be sure to observe ISO 4414 and
other safety practices.
■ Definition
Label
△
WARNING
！
△
CAUTION
！
① The compatibility of the product is the responsibility of the person who designs the
equipment or decides its specifications.
Since the product specified here is used under various operating conditions, its
compatibility with specific equipment must be decided by the person who designs the
equipment or decides its specifications based on necessary analysis and test results.
The expected performance and safety assurance of the equipment will be the responsibility
of the person who has determined its compatibility with the product. This person should
also continuously review all specifications of the product referring to its latest catalog
information, with a view to giving due consideration to any possibility of equipment
failure when configuring the equipment.
② Only personnel with appropriate training should operate machinery and equipment.
Compressed air can be dangerous if an operator is unfamiliar with it. Assembly, handling
or repair of pneumatic systems should be performed by trained and experienced operators.
③ Do not service machinery/equipment or attempt to remove the product until safety is
confirmed.
A. Inspection and maintenance of machinery / equipment should only be performed once
measures to prevent falling or runaway of the driver objects have been confirmed.
B. When equipment is to be removed, confirm the safety process as mentioned above. Cut
the supply pressure for this equipment and exhaust all residual compressed air in the
system.
C. Before machinery / equipment is restarted, take measures to prevent shooting-out of
cylinder piston rod, etc.
④ Contact SMC beforehand and take special consideration of safety measures if the product
is to be used in any of the following conditions.
A. Conditions and environments beyond the given specifications, or if product is used
outdoors.
較 B. Installation on equipment in conjunction with atomic energy, railway, air navigation, c
vehicles, medical equipment, food and beverages, recreation equipment, emergency stop
circuits, clutch and brake circuit in press # 囅uit in preui~ﾓ▕仝 盨Ь火移奄逢ts
Operator error could result in serious injury or loss of life.
Operator error could result in injury or equipment damage.
Meaning of label
△
WARNING
！