System Fans - Supermicro SuperServer SYS-E102-9AP-LN4-E User Manual

System Fans

The chassis includes one 4-cm fan.
Replacing the System Fan
1. Power down the system as described in Section 3.1 and remove the chassis cover.
2. Remove the failed fan power cable from motherboard.
3. Remove the motherboard from the chassis.
4. Remove the screws securing the fan to the chassis wall and set these aside.
5. Lift the fan out of the chassis.
6. Align the replacement fan with the holes in the wall of the chassis.
7. Secure the fan to the chassis wall using the screws previously set aside.
8. Replace the motherboard and reconnect the fan cable to motherboard.
9. Reinstall the chassis top cover, and power up the system.
4
Chapter 3: Maintenance and Component Installation
Figure 3-3. System Fan
30