So-Dimm Installation; So-Dimm Removal - Supermicro SuperServer SYS-E102-9AP-LN4-E User Manual

SO-DIMM Installation

1. Insert the SO-DIMM module vertically at about a 45 degree angle. Press down until the
module locks into place. The side clips will automatically secure the SO-DIMM module,
locking it into place.
Insert this end first
Locking clip

SO-DIMM Removal

1. Push the side clips at the end of the slot to release the SO-DIMM module. Pull the SO-
DIMM module up to remove it from the slot.
Chapter 3: Maintenance and Component Installation
26