Supermicro SuperServer SYS-E102-9AP-LN4-E User Manual page 39

HDD LED
The HDD LED connection is located on pins 5 and 6 of JF1. Attach a cable here to indicate
the status of HDD-related activities, including SATA activities. Refer to the table below for
pin definitions.
Power LED
The Power LED connection is located on pins 7 and 8 of JF1. Refer to the table below for
pin definitions.
Chapter 4: Motherboard Connections
HDD LED
Pin Definitions (JF1)
Pin# Definition
5 +3.3V
6 HDD Active LED
Power LED
Pin Definitions (JF1)
Pin# Definition
7 +3.3VSB
8 Power LED Low
39