Table of Contents
Advertisement
3.2 Accessing the System
The CSE-E102TF chassis features a removable top cover, which allows easy access to the
inside of the chassis.
Removing the Top Cover
1. On the chassis rear, remove the two screws.
2. Slide the cover to the rear as illustrated above to release the cover hooks from the
chassis, and lift the cover off.
Caution: Except for short periods of time, do not operate the server without the cover in place.
The chassis cover must be in place to allow for proper airflow and to prevent overheating.
Chapter 3: Maintenance and Component Installation
Cover Hooks
Figure 3-1. Removing the Chassis Cover
21
Cover Hooks
2
Screws
1
Advertisement
Table of Contents
Troubleshooting
