Front Panel Controls And Indicators - GE DINAMAP ProCare 100 Service Manual

2.3.2. Front Panel Controls and Indicators

Revision A
Product Description: 2.3. Controls, Indicators, and Connectors
Buttons
1 Silence button: Press to mute audible alarms. Any alarm active that is
acknowledgeable is also removed whenever this key is pressed. When
pressed after alarm sounds (silence active), the silence icon (bell) lights
to indicate that audible alarms have been silenced for 2 minutes.
2 Alarms button: Press to view or adjust parameter alarm settings
3 +/- button (Plus/Minus): Press the + button to increment an adjustable
setting and the - button to decrement an adjustable setting. This button is
active only when a user-setting mode (limit or menu) is active.
4 Menu button: Press to access menu settings that can be adjusted while in
clinical mode (i.e., ALARM VOLUME, PULSE VOLUME, INFLATE
PRESSURE; refer to Operating Modes in this section for a description of
clinical mode.)
5 SpO sensor connector: SpO
2
6 BP connector: BP cuff hose attaches here.
7 Inflate/Stop button: Press to start a manual BP determination or stop any
BP determination.
8 Temperature probe holster: Temperature probe is stored here.
9 Cycle button: Press to start Auto Cycle or STAT mode.
10 Temperature probe cover storage: Box of probe covers is stored here
11 History button: Press to activate the history mode. When activated, it
displays the most recent entries stored. Press and hold the button for 2
seconds to clear all entries stored.
12 Print button: Press to print currently displayed values or all stored entries
when in history mode.
13 On/Off button: Controls on/off state of monitor; push for power on and
push again for power off.
14 Temperature probe connector: Temperature probe cable attaches here.
ProCare Partient Monitor Service Manual
2009381-001
sensor cable attaches here .
2
2-5