Where To Go From Here - Lantronix SecureLinx SLK Series User Manual

text-editing application and perform a keyboard functionality test to confirm
operation.
12 Click the Back button in your browser to return to the SLK home page.
13 Click the channel on the next row and repeat steps 10 through 12. Continue this
process for all the remaining channels that are being used.
14 In the left pane, under Configuration, click User Accounts. The User Accounts
screen opens.
15 Enter a new master account password in the first text box. Then enter the same
password in the second text box next to it. For security reasons, each typed
character appears as a dot.
Note: Store the new master account password in a safe place. If you lose or forget it,
contact Lantronix Technical Support.
16 Click Change.
17 Follow the instructions on the SLK home page to view the current screen
contents and take control of the host's keyboard and mouse. You can open a
new window to view the screen contents or start a new full screen browser
window. You may need to use the
Note:

Where to Go from Here

Following the initial configuration and verification, set up users and security
parameters.
There are two ways to configure your SLK:
❖
Using its embedded web control interface.
❖
Using the local console's On Screen Display (OSD) interface.
The web control interface provides a graphical interface that lets you configure your
SLK and control the target servers and other connected devices using a standard web
browser. For more information, see
Configure the SLK."
The OSD configuration method provides a text-based interface with minimal
prompting and guidance. For more information, see
Interface to Configure the SLK".
After you configure your SLK, you can:
SecureLinx SLK Remote KVM User Guide
For future troubleshooting, see
keys to exit the window.
Chapter 7, "Troubleshooting" on page
Chapter 4, "Using the Web Control Interface to
Chapter 5, "Using the OSD
Installing the SLK
7-1.
3-21