Security; Secure Boot - Nexcom NViS 14162 Series User Manual

Chapter 4: BIOS Setup

Security

Aptio Setup - AMI
Main Advanced Chipset Security
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
►

Secure Boot

Version 2.21.1278. Copyright (C) 2021 AMI
Administrator Password
Select this to reconfigure the administrator's password.
Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Save & Exit
Set Administrator Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Secure Boot
Aptio Setup - AMI
Main Advanced Chipset
System Mode
Secure Boot
Secure Boot Mode
Restore Factory Keys
►
Reset to Setup Mode
►
Key Management
►
Version 2.21.1278. Copyright (C) 2021 AMI
Secure Boot
Select this to enable or disable Secure Boot. Secure Boot only works when
the system runs in user mode.
Secure Boot Mode
Select this to configure the Secure Boot mode.
Standard Fixed scure boot policy.
Custom Secure boot policy variables can be configured by a physically
present user without full authentication.
59
Security Boot Save & Exit
Setup
Secure Boot feature is Active
if Secure Boot is Enabled.
Platform Key(PK) is enrolled
[Enabled]
and the System is in User mode.
Not Active
The mode change requires
platform reset
[Standard]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NViS 14162 Series User Manual