Nexcom NViS 14162 Series User Manual page 72

Chapter 4: BIOS Setup
SATA Ports Multiplier
Enables or disables ports multiplier.
SATA Test Mode
Enables or disables test mode.
Port 0 to Port 1
Enables or disables SATA Port 0 to 1.
Hot Plug
Enables or disables hot plugging feature on SATA port 0 to port 1.
Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
USB Configuration
Aptio Setup - AMI
Main Advanced Chipset
USB Configuration
XHCI Compliance Mode
xDCI Support
USB2 PHY Sus Well Power Gating
USB3 Link Speed Selection
USB PDO Programming
USB Overcurrent
USB Overcurrent Lock
USB Port Disable Override
USB Device/HOST Mode Override
USB UCSI ACPI device
Version 2.21.1278. Copyright (C) 2021 AMI
XHCI Compliance Mode
Option to enable compliance mode, default is to disable compliance mode.
xDCI Support
Enables or disables xDCI (USB OTG Device)
USB2 PHY Sus Well Power Gating
Select 'Enabled' to enable SUS Well PG for USB2 PHY. This option has no
effect on PCH-H.
USB3 Link Speed Selection
This option is to select USB3 Link Speed Gen1 or Gen2.
57
Security Boot Save & Exit
Option to enable Compliance
Mode. Default is to disable
Compliance Mode. Change to
[Disabled]
enabled for Compliance Mode
[Disabled]
testing.
[Enabled]
[GEN2]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
→←: Select Screen
[Disabled]
↑↓: Select Item
Enter: Select
[Disabled]
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NViS 14162 Series User Manual