GI-SMD/SID
Internal Circuit Diagram
GI-SMD1624
T0 to 11
IN0 to 11
V0
G0
Dimensions
GI-SMD1624
GI-SID1224
Note: For dimensions with the communications cable connected, refer to the GI-S-series Safety I/O Terminal User's Manual.
* This is a dimension from the DIN Track seat to the safety I/O terminal surface.
Related Manuals
Manual name
GI-S-series Safety I/O Terminal
User's Manual
NX-series Safety Control Unit /
Communication Control Unit User's
Manual
NX-series NX102 CPU Unit
Hardware User's Manual
Sysmac Studio Version 1 Operation
Manual
Safety Precautions
Be sure to read the Common Precautions for Safety Warning at the following URL: http://www.ia.omron.com/.
Be sure to read the following user's manual for other details required for correct use of the Safety I/O Termi-
nals.
7
LED indicator
OUT0 to 3
V1
G1
3.1
65
3.1
4.5
Cat. No.
Model numbers
Z400
GI-S
NX-SL5
NX-SI
Z395
NX-SO
NX-CSG
W593
NX102-
W504
SYSMAC-SE2
GI-SID1224
T0 to 11
IN0 to 11
V0
G0
170
Application
Learning how to use the GI-S-
series safety I/O terminals.
Learning how to use the NX-series
Safety Control Units and
Communications Control Units.
Learning the basic specifications of
the NX102 CPU Units, including
introductory information,
designing, installation, and
maintenance.
Mainly hardware information is
provided.
Learning about the operating
procedures and functions of the
Sysmac Studio.
LED indicator
(Unit: mm)
51*
55
Description
The hardware, setup methods, and
functions of the GI-S-series safety I/O
terminals are described.
Describes the hardware, setup methods,
and functions of the NX-series Safety
Control Units and Communications Control
Units.
An introduction to the entire NX102 system
is provided along with the following
information on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and Inspection
Describes the operating procedures of the
Sysmac Studio.