Installing Your Washing Machine; Choosing The Right Location For Your Washing Machine - Logik L714WM12E Installation Instructions Manual

7kg washing machine
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 28
INSTALLATION

Installing Your Washing Machine

Please read and follow the instructions carefully.
In addition to the instructions mentioned here, special regulations of the relevant water and power
supply companies may apply. If in doubt, have the washing machine connected by a qualified
technician.
The washing machine is heavy - caution when lifting it. Do not lift by projecting components (e.g.
washing machine door).
Warning: Frozen hoses may tear/burst. Do not install washing machine in outdoor areas or where
there is a risk of frost.
Lay hoses and cables in such a way that there is no risk of trapping or kinking.
Additional space (approximately 120mm) is required for the rear of the washing machine. This
is to allow enough space for the water hose and drain hose connections.

Choosing the Right Location for Your Washing Machine

Make sure there's enough space for your washing machine.
Install your washing machine on a flat, stable surface to avoid excessive vibration and noise.
Don't install your washing machine in direct sunlight or in a place where temperatures can reach
freezing.
The ventilation openings in the base of the washing machine must not be obstructed by carpet.
Two or more people are required to move the washing machine.
Start by tilting the washing machine backwards.
One person should stand behind it, holding the rear of the top panel. The other person should grip
the bottom feet at the front.
Check that you have all the required accessories for installation.
We recommend that you entrust the installation of the washing machine to a qualified technician.
Sloping
Unstable
surface
Bumpy
surface
GB
29

Advertisement

Table of Contents
loading

Table of Contents