Table of Contents
Advertisement
For your continued safety and to reduce the risk of injury or electric shock,
please follow all the safety precautions listed below.
WARNING!
• If you will not be using the washing machine for a while such as when
you go on holiday, disconnect the plug from the mains supply and
turn off the water supply to the washing machine. This is particularly
important if there is no drainage around the washing machine.
• If the water supply is left on, water pressure may build up and cause a
leak.
General Use
• Transit bolts are used to transport the washing machine. You should
remove these using a spanner or similar tool before you install the
washing machine. If you do not, it will cause strong vibrations when the
washing machine is spinning.
• Do not install your washing machine anywhere that is damp or exposed
to the weather. If you do, it may cause an electric shock, fire, failure or
deterioration.
• Do not pour water directly onto any part of the washing machine. It may
cause a short circuit or electric shock.
• Keep burning objects such as candles or cigarettes, away from the
washing machine. They may cause a fire or damage.
• Keep flammable substances well away from the washing machine – for
example kerosene, gasoline, benzene, paint thinner and alcohol, or
clothing soaked with these. They may cause an explosion or a fire.
• This washing machine is only suitable for washing textiles labelled
'washing machine washable' .
• Do not connect the washing machine to hot water. The washing
machine works with cold water only.
• Before you start using the washing machine, turn the tap on to check
that the hose is properly connected. If it's not, there may be a water leak.
• Do not put too much laundry or detergent into the washing machine. It
may cause issues with the washing machine or laundry.
• Be careful not to get your laundry caught in the door when you close it.
This could cause a water leak or damage your laundry.
• This washing machine is for household (domestic) use only.
SAFETY WARNINGS
WASHING MACHINE
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Logik LIW714W20
Summary of Contents for Logik LIW714W20
- Page 1 SAFETY WARNINGS WASHING MACHINE For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below. WARNING! • If you will not be using the washing machine for a while such as when you go on holiday, disconnect the plug from the mains supply and turn off the water supply to the washing machine.
- Page 2 • The higher the spin speed, the noisier the spin cycle. The higher the spin speed, the lower the remaining moisture content in the laundry after spinning. • Load your appliance up to the recommended load capacity. This will help to reduce the overall energy/water consumption of washing/drying your clothes.
- Page 3 could damage your laundry or the washing machine. • To prevent any large, heavy objects (e.g., buckles, large buttons, etc.) from hitting the glass door, turn your clothing inside out or remove the heavy objects. They could damage your laundry or the washing machine.
- Page 4 Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0344 800 3456 (UK customers only) Calls charged at National Rate. The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste.
- Page 5 7kg Integrated Washing Machine Instruction / Installation Manual LIW714W20...
-
Page 7: Table Of Contents
Contents Unpacking ............................5 Installing Your Washing Machine .......................6 Choosing the Right Location for Your Washing Machine ..................6 Moving and Installing .........................7 Removing the Transit Bolts ............................7 Removing the Polystyrene Foam ..........................7 Moving the Washing Machine from One Location to Another ................7 Hose and Cable Lengths ..............................8 Levelling the Washing Machine ..........................8 Water Supply Hose ................................8... - Page 8 Hints and Tips ............................23 Questions and Answers ........................25 Error Codes ..................................26 Specifications .............................26...
-
Page 9: Unpacking
Thank you for purchasing your new product. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. Read all the safety instructions carefully before use and keep this instruction manual for future reference. -
Page 10: Installing Your Washing Machine
Installation INSTALLATION Installing Your Washing Machine Please read and follow the instructions carefully. • In addition to the instructions mentioned here, special regulations of the relevant water and power supply companies may apply. If in doubt, have the washing machine connected by a qualified technician. -
Page 11: Moving And Installing
INSTALLATION Moving and Installing Removing the Transit Bolts Four transit bolts keep the interior of the washing machine in place while it’s being moved. They need to be removed before installation. Use a spanner (not supplied) and follow the instructions detailed below. Don’t run the machine without removing the transit bolts, as this can cause excessive vibrations and may damage your machine. -
Page 12: Hose And Cable Lengths
INSTALLATION Hose and Cable Lengths How to connect from the left side How to connect from the right side ~80cm ~130cm ~90cm ~40cm 110 -135cm Levelling the Washing Machine There are levelling feet on the underside. They must be adjusted to make sure the washing machine is level. -
Page 13: Water Drain Hose
INSTALLATION Connecting the Water Supply Hose 1. To prevent leakage from the connection 3/4” 3/4” joints, ensure the rubber washer seals are fitted to each end of the water supply min. 10 mm min. 10 mm hose. Do not use without the seals in Plastic joint place. -
Page 14: Installing Into Kitchen Furniture
INSTALLATION Installing into Kitchen Furniture This appliance is designed to be built into kitchen furniture. Follow the measurement below for correct installation. 580mm 830mm 825mm 17.5mm During installation, make sure the hoses are placed out of the way. This can prevent the hoses from being kinked or trapped. - Page 15 INSTALLATION 2. Decide from which direction the cabinet door Door Drill Template Door Drill Template will open. Door open from left to right Door open from right to left 3. Depending on the direction the cabinet door will open and close, drill holes (hinge Ø 35 mm;...
-
Page 16: Connecting To The Mains Supply
INSTALLATION 7. Fix the cabinet door on the machine. Screw the hinges on the machine using screw B. 8. Close the cabinet door. Spacers on the cabinet door shall attract to the magnets on the machine. Connecting to the Mains Supply For your safety: •... -
Page 17: Product Overview
Product Overview The unit Detergent Control Panel Compartment Door Handle Window Drain Filter... -
Page 18: The Control Panel
The Control Panel LED Display • Illuminate the pre-wash and extra rinse lights if selected. • After the wash procedure begins, the remaining washing time will be displayed. • When the child lock function is selected, CHILD LOCKED Power Button Programme Dial icon will be illuminated. -
Page 19: Preparation
Preparation Read the following to understand how best to prepare your laundry for washing. Organising Laundry • Read the washing label on each garment to help you sort your washing into different loads. • Sort the laundry by colour, type of fabric and by how soiled it is. This will help you choose the correct programme and temperature for each wash. -
Page 20: Adding Detergent And Softener
Adding Detergent and Softener • Add detergent into the appropriate dispenser. • Apply softener before you start washing. Main Wash Main wash Detergent detergent • Apply detergent and softener according to the washing amount, the soiling level, the water hardness in your area Softener Softener and the manufacturer’s instructions of these products. -
Page 21: Before First Use
Before First Use Before washing your clothes for the first time, run a full wash programme first: 1. Connect the machine to the mains power supply and the water supply. 2. Put a small amount of detergent in the detergent drawer. Close the drawer. 3. -
Page 22: Selecting The Programme
Selecting the Programme Here are the available programmes. Temperature can be selected separately for certain programmes. Detergent Box Default Default Time Default Load (kg) Temp. (˚C) (hr) Speed (rpm) Case Case Softener Programme Case Express 15’ Cold 0:15 Rapid 45’ 0:45 20°C 1:01... -
Page 23: Delay Start The Programme
Here are the additional functions and option settings. Delay Prewash Extra rinse Programme Express 15’ Rapid 45’ 20°C Jeans ECO 40-60 Cotton Rinse & Spin Spin Baby Care Wool Delicate Synthetic Sports Linen O Means optional X Means not available Delay Start the Programme 1. -
Page 24: Important Information
Important Information Washing Delicates (Wool and Silk Programmes) These programmes rock the drum gently for best results on delicate laundry. • Silk laundry loads: 2kg or less • Tips for Wool programme: Approximate Weights: - Wool sweater (400g) - Silk blouse / under garment (200g) - Trousers (400g) Adding Delicate Laundry Items to the Drum •... -
Page 25: Maintenance - Cleaning The Washing Machine
Maintenance - Cleaning the Washing Machine Always unplug the machine before cleaning. To prevent build-up of detergent residue, it is recommended to wash the appliance without any load or detergent once a month. Cleaning the Drum Any rust left inside the drum by metal articles must be removed immediately with chlorine-free detergent. -
Page 26: Cleaning The Drain Filter
Cleaning the Drain Filter Be careful not to burn yourself while cleaning the drain filter. Water draining from the filter compartment may be hot after a high temperature wash. Before cleaning the drain filter, switch off and unplug the washing machine. 1. -
Page 27: Hints And Tips
Hints and Tips Issues Solutions Buttons don’t work. • Child lock is activated. Deactivate the child lock function. • The washing machine is operating a wash programme. The Programme Dial was turned to a different programme. • Door doesn’t open. •... - Page 28 There’s not much foam. • This can happen if you’ve put powder detergent directly into the drum – you must put it in the detergent drawer. • The amount of foam can vary, depending on the temperature, level and softness of your water. •...
-
Page 29: Questions And Answers
Questions and Answers Issues Reasons Solutions • Check if the door is closed tightly. • Check if power plug is inserted properly. Washing machine cannot • Check if water supply tap is opened. start up Check if button Start/Pause is pressed. •... -
Page 30: Error Codes
Check if the clothes are pinned by the door. Others • Please call the service line if there is any other issue. Specifications Model LIW714W20 Rated Voltage 220 - 240 V~ Rated Frequency 50 Hz Maximum Energy Rated Power Input... - Page 32 IB-LIW714W20-200909V2...
- Page 33 655mm 191.6mm 337.1mm 179.5mm 337.1mm 172.9mm 337.1mm 191.6mm 337.1mm...
Need help?
Do you have a question about the LIW714W20 and is the answer not in the manual?
Questions and answers