Physical Characteristics; Clearance Guidelines - Cisco NCS 540 Installation Manual

Small density passive cooled routers

Hide thumbs Also See for NCS 540:

Table of Contents

Physical Characteristics

the environmental characteristics that are described in the Cisco Network Convergence System 540 Small

Density Passive Cooled Routers Datasheet.

For an outside plant installation (cell site cabinet, hut, and so on), install the router in a cabinet that protects

the product against rain and direct sunlight. The airborne contaminants such as, dust, moisture, insects, pests,

corrosive gases, polluted air, or other reactive elements present in the outside air should be within the GR3108

class 3 outdoor levels. Maintain a temperature within –40º C to 65º C (–40 to 149°F).

Note

Not all metallic connections are applicable for outside plant connections.

The equipment is designed to meet the following requirements:

• GR-63-CORE, Issue 4

• GR-1089-CORE, Issue 6

• GR-3108-CORE, Class 3

Physical Characteristics

Be familiar with the physical characteristics of the router to assist you in placing the system in the proper

location. For more information, see the Cisco Network Convergence System 540 Small Density Passive Cooled

Routers Datasheet.

The router is a passive-cooled equipment with no fans.

Cisco Network Convergence System 540 Passive Cooled Small Density Routers Hardware Installation Guide

Preparing for Installation

Table of Contents