ATH-Heinl Cross Lift 35 OG User Manual page 95

13.6.1 TO LOWER RUNWAYS MANUALLY
a. Padlock the power switch;
b. Open the front cover of the control unit;
c. Set the MAIN/JACK selector to "
f. Manually activate the pneumatic valve or mechanically block the safety catches so that they cannot
engage.
When a mechanical safety is released, it is advised to use a carton board to
put between the safety pawl and the rack to avoid it from engaging. In this
case, do not need to press the emergency button continuously.
Screwing or unloosing the emergency screw can reduce or increase the
lowering speed
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-11
";
Manufacturer ATH-Heinl GmbH & CO.KG
- 34 -