Installation And Operation; Unpacking And Inspection; Wiring Terminal View - Njoy Garun Series User Manual

2

Installation and operation

2.1. Unpacking and inspection

Unpack the package and check the package contents. The shipping package
should contain:
• One UPS
• One USB cable
• For Garun 10 KL (UP33TOP110KGAAZ01B and
UP33TOP110KGAAZ02B) you should have the following cables:
Length
No. Description
(cm)
1 10 AWG cable (Black) 10
2 10 AWG cable (Black) 30
UPS to Cabinet 3x AWG 8
3 150
(Red/Blue/Black)
• For Garun 15 KL (UP33TOP115KGAAZ01B) and Garun 20 KL
(UP33TOP120KGAAZ01B and UP33TOP120KGAAZ02B) you should
have the following cables:
Length
No. Description
(cm)
1 10 AWG cable (Black) 10
2 10 AWG cable (Black) 30
3 10 AWG cable (Black) 65
UPS to Cabinet 3x AWG 6
4 150
(Red/Blue/Black)
NOTE!
Before the installation, please inspect the unit. Be sure that there is no physical
damage to the unit. Do not turn on the unit and notify the carrier and dealer
immediately if there is any damage or missing parts and accessories. Please keep
the original packaging for future use. It is recommended to keep each equipment
and battery set in their original packaging because they have been designed to
provide maximum protection during transportation and storage.
8
Quantity
Observations
(pcs)
16 F2 to F2 connector
2 F2 to F2 connector
11.5mm (ANEN) to
1
11.5mm (ANEN)
Quantity
Observations
(pcs)
29 F2 to F2 connector
8 F2 to F2 connector
1 F2 to F2 connector
11.5mm (ANEN) to
1
11.5mm (ANEN)

2.2. Wiring terminal view

1
RS-232 communication port
2
USB communication port
3
Emergency power off function connector (EPO connector)
4
Share current port
5
Parallel port
6
Intelligent slot
7
External battery connector/terminal
8
Line input circuit breaker/switch
9
Maintenance bypass switch
10
Input/Output terminal (Refer to diagram 2, 3.a, 3.b and 3.c for details)
11
Bypass input circuit breaker/switch
12
Output switch
9