3-2.4. Setting Screen - Njoy Garun Series User Manual

Measure screen page 3
INPUT W: R, S and T input power in watt.
INPUT VA: R, S and T input power in VA.
INPUT W (%): R, S and T input power watt in percentage.
INPUT VA (%): R, S and T input power VA in percentage.
Input current: The real-time value of input current in R, S and T phases.
Output current: The real-time value of output current in R, S and T phases.
3.2.4. Setting screen
This sub-menu is used to set the parameters of UPS. Touch the icon
setting menu page. There are 2 options: Basic and Advanced. Touch the icon
to return to main screen. Touch the icon
NOTE!
Not all settings are available in every operation mode. If the setting is not
available in present mode, the LCD will keep its original setting parameter showed
instead of changing the parameters.
WARNING
DO NOT attempt to modify any settings of the UPS unless you are a
trained technician. If you need to change any settings of this UPS or you
have technical warnings or faults shown on UPS screen, please contact the
technician that installed the UPS.
24
to enter
to go back to previous menu.
Setting Menu
GENERAL: It's to set up basic information of the UPS. It's not related to any
function parameter.
ADVANCE: It's required to enter password to access to the "ADVANCE"
setting. There are two types of authority, User and Maintainer.
SAVE SETTING: This function is reserved for future.
General
General Setting page 1
Date/Time: Set the date and time. The format is YYYY-MM-DD HH:MM:SS.
The calendar day will be automatically changed when the year, month and
date are set.
Language: Set the LCD language.
Input Source: Select the input source. There are two options: Line (utility)
and generator. Line is default setting. This setting value will show on the main
page. When "generator" is selected, the acceptable input frequency will be
fixed at the range of 40~70Hz. This setting value will show on the status bar.
25