BDI VALENCIA 1856 Assembly Instructions

VALENCIA
End Table

Product Registration

Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/

Placement and Maintenance

Valencia ™ is designed for indoor use on level floors. Clean glass with
glass cleaner and metal surfaces with a moist cloth.
Your Valencia ™ End Table is engineered for easy assembly. Carefully
follow this procedure to prevent any damage. Do not use power tools for
assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at:
customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
Designed by Louis A. Lara.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Valencia & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017, BDI
Made in China. 07.07.2017 v2
1856
TM
bdiusa.com
customerservice@bdiusa.com
T1- 4mm Hex
Wrench x 2
H1 12mm Flat head
Screw x 6
H2 Threaded steel
spacer x 3
H3 Light gray bumper x 4
C3 Glass Top x 1
C1 Large Frame x 1
C2 Small Frame x 1