Arpeggiator - Roland KIWI-3P Manual

Arpeggiator

www.kiwitechnics.com
The KiwiTechnics 3P Upgrade has a
built in Arpeggiator that can be
applied to any sound.
Arpeggiator Mode is entered and
exited by pressing and releasing the
ARP (JX-3P Mute) button.
The ARP button will flash when the
ARP is running.
The clock for the Arpeggiator can
be divided from the master clock
using the ARP DIVIDE button (JX-3P
SEQ WRITE button) and the divide
setting changed using the SENS
slider. The 13 divide options are:-
Half Note (48/Step)
Quarter note (24/Step)
8th note (12/Step)
8th note, 1/2 swing (14,10/Step)
8th note, full swing (16,8/Step)
8th note triplets (8/Step)
16th note (6/Step)
16th note, half swing (7,5/Step)
16th note, full swing (8,4/Step)
16th note triplets (4/Step)
32nd note (3/Step)
32nd note triplets (2/Step)
64th note triplets (1/Step)
A long press of the HOLD button
allows the ARP MODE to be
changed using the SENS slider.
Press HOLD or Cancel to exit this
mode. Options are UP , DOWN,
UP/DOWN, RANDOM & AS PLAYED
A long press of the KEY TRANS
button allows the ARP RANGE to be
changed using the SENS slider.
Press HOLD or Cancel to exit this
mode. Options are 1, 2, 3 or 4
Octaves.
Note - If the Arpeggiator notes held
are spread over more than 1 octave
and more than one octave is
selected in the Arp Range the notes
played will be as follows. All the first
octave notes held will play followed
by the same pattern moved up one
or two octaves. The result of this will
be the first note of the second pass
can be lower than the last note of
the first pass. This can sound odd if
you have selected one direction for
the Arp Mode.
Kiwi-3P Matrix Upgrade User Manual v1.2
19