01 (1) Request Global Dump; 02 (2) Transmit Or Receive Global Dump; 03 (3) Request Tone Edit Buffer Dump - Roland KIWI-3P Manual

Table 1.0 Command ID

$01 (1) Request Global Dump

$02 (2) Transmit or Receive Global Dump

32 data bytes

$03 (3) Request Tone Edit Buffer Dump

www.kiwitechnics.com
Data Byte
No Data
$00 (0) = Midi Channel In
$01 (1) = Midi Channel Out
$02 (2) = Seq Midi Channel Out
$03 (3) = Enable MidiCC
$04 (4) = Enable Sysex
$05 (5) = Enable Program Change 000000xx
$06 (6) = Midi Soft Through
$07 (7) = Enable Midi Clock Gen 0000000x
$08 (8) = Master Clock Source
$09 (9) = Master Fine Tune
$0a (10) = Clock Display
$0b (11) = Guitar Mode
$0c (12) = Pedal Control
$0d-$1f (13-31) = Nulls
No Data
Data Type Data Details
Byte details
7 ------- 0
3P transmits a $02 (2) command
000yxxxx xxxx = 0-15 for midi channel 1-16
y = set for Omni
0000xxxx xxxx = 0-15 for midi channel 1-16
0000xxxx xxxx = 0-15 for midi channel 1-16
000000xx xx = 00=Off
01=CC Receive Enabled (Default)
10=CC Transmit Enabled
11=CC Receive & Transmit Enabled
0000000x x = Off/On (set=On)
xx = 00=None
01=PC Receive Enabled (Default)
10=PC Transmit Enabled
11=PC Receive & Transmit Enabled
000000xx xx = 00=Stop all
01=Pass all
10=Pass only nonCC
11=Stop only CC we have used
Note - SysEx intended for the Kiwi-3P will not be passed
Note – Active Sensing commands are suppressed within the Kiwi-3P
and are not passed on
x = Off/On (set=On)
0000000x x= 0-Internal
1-Midi
0xxxxxxx x = Master Fine Tune (+- 100 cents)
0000000x x= 0-Off
1-On
0000000x x = Off/On (set=On) – Note this uses midi channels 1-6 only
0000000x x= Sets Hold Pedal Polarity
Not Used
3P Matrix Upgrade User Manual v1.2
48