04 (4) Transmit/Receive Tone Edit Buffer Dump - Roland KIWI-3P Manual

$04 (4) Transmit/Receive Tone Edit Buffer
Dump
Null x 2 + 128 data bytes
www.kiwitechnics.com
2 x Null + 128 bytes data
$00-$0f (0-15) = Tone Name
$10 (16) = DCO1 Wave/Range
$11 (17) = DCO1 Tune
$12 (18) = DCO1 LFO Mod Amount
$13 (19) = DCO1 Env Mod Amount
$14 (20) = DCO1 PW Amount
$15 (21) = DCO1 PWM Amount
$16 (22) = DCO1 DYN Amount
$17 (23) = DCO1 Control
$18 (24)=DCO2 Wave/Range
$19 (25) = DCO2 Tune
$1a (26) = DCO2 Fine Tune
$1b (27) = DCO2 LFO Mod Amount
$1c (28) = DCO2 Env Mod Amount
$1d (29) = DCO2 PW Amount
2 x null bytes sent followed by 128 bytes of data in the
following format
Ascii Bytes Tone Name
000wxyzz zz = DCO 1 Range
00=16'
01=8'
10=4'
y = DCO 1 Saw Wave
x = DCO 1 Pulse Wave
w = DCO 1 Square Wave
0xxxxxxx x=0-24 (-12 → 0 → +12 notes)
0xxxxxxx (0-127)
0xxxxxxx (0-127)
0xxxxxxx (0-127)
0xxxxxxx (0-127)
0xxxxxxx (0-127)
0wwxyyzz zz = DCO1Env(00=Env1,01=Env2,10=Env3)
yy = DCO1LFO(00=LFO1,01=LFO2,10=LFO3)
x = DCO1Env Pol(0=Norm,1=Inverted)
ww = DCO1PWM Src(00=Env1,01=Env3,10=LFO2,11=LFO3)
00vwxyzz zz = DCO 2 Range
00=16'
01=8'
10=4'
y = DCO 2 Saw Wave Enable
x = DCO 2 Pulse Wave Enable
w = DCO 2 Square Wave Enable
v = DCO 2 Noise Enable – Noise overrides y,x&w
0xxxxxxx x=0-24 (-12 → 0 → +12 notes)
0xxxxxxx x=0-127 +- 50 Cents and zero
0-63 is shifted down
64 is not shifted
65-127 is shifted up
0xxxxxxx (0-127)
0xxxxxxx (0-127)
0xxxxxxx (0-127)
3P Matrix Upgrade User Manual v1.2
49