Midi Data - Roland KIWI-3P Manual

Midi Data

Function
Basic Channel
Note Number
Mode
Velocity
Note On
Note Off
Aftertouch
Keys
Channels
Pitch Bender
Control Change
Program Change
System Exclusive
System Real Time Clock
Commands
Modulation
Notes X=No O=Yes
Supported Midi
Messages
Note Off
Note On
Continuous Controllers $bn (160-191) $kk
Program Change
Channel Aftertouch
Pitch Bend
www.kiwitechnics.com
Transmitted
1-16
24(C1)-108(C8)
X
O
X
X
X
O
O
X
O
O
O
Status Second Third Notes
$8n (128-143) $kk
$9n (144-159) $kk
$cn (192-207) 0-127
$dn (208-223) $kk
$en (224-239) $kk
Recognized Notes
1-16 If Omni selected the 3P will recognize any
midi channel
0-127 Notes that are received outside the JX-3P
range of 24-108 are transposed to the
nearest octave within range.
X Voice Modes need to be changed using Midi
Control or Sysex commands
All keys sent from the JX-3P have a velocity
O set by the Global Parameter A4 (or midiCC
107)
X
Due to the small number of keyboards
X supporting Key AT only Channel AT has been
implemented.
O
O Midi & internal bends are additive within
the 3P. Midi bend input is effected by the
Range switch.
O Only if Midi CC option is Enabled. See
Control Change Tables for details
0-127 If CC0, CC32 is 0,0 then 0-63 selects Tone
Bank 1, 64-127 Selects Tone Bank 2
If CC0, CC32 is 0,1 then 0-63 selects Tone
Bank 3, 64-127 Selects Tone Bank 4
O Only if Midi Sysex option is Enabled - See
Sysex Table for details
O Will Transmit from Seq Clock if Clock Output
is enabled. Input clocks passed through to
midi out unaltered. Recognized within the 3P
only if the clock source has been set to
midi on the Pattern, Arp or Sequence clocks
O Will adjust patch value(s) as a temporary
effect if enabled.
$yy n = 0-15 midi channel
kk = note number (0-127) -outside range 24-108 are
ignored
yy = Don't care (ignored)
$yy n = 0-15 midi channel
kk = note number (0-127)-outside 24-108 are transposed
to the nearest Octave
yy = 0=Off, 1-127 = Note Velocity.
$yy n = 0-15 midi channel
$kk & $yy see CC table
n = 0-15 midi channel
If CC0, CC32 is 0,0 then
0-63 selects Tone Bank 1, 64-127 Selects Tone Bank 2
If CC0, CC32 is 0,1 then
0-63 selects Tone Bank 3, 64-127 Selects Tone Bank 4
--- n = 0-15 midi channel
kk = Channel Pressure (0-127)
$yy n = 0-15 midi channel
kk = Least Significant 7 bits
yy = Most Significant 7 bits
Note $xx = hex number
Kiwi-3P Matrix Upgrade User Manual v1.2
41