Editing Quick Dial - Ricoh 1045 Fax Manual

Setup
D Select the standard message to
be stamped at the second or
third line.
3
E Press [OK].
F Press [OK].
G
Press [OK].
Note
❒ If you press [Cancel], group is
not programed. The display ap-
pears as in step C.
H
Press [Exit] twice.
The machine will return to standby
mode.
60

Editing Quick Dial

Change the receiver information al-
ready programed.
Limitation
❒ When a programed Quick Dial key
is being used for a standby Memo-
ry Transmission, the message
"Specified destination is
used by transmission standby
file. It cannot be changed or
deleted. Specify it again
after transmission is com-
is shown. You cannot
pleted."
change the destination for this key.
A
Press [Dest. Manage].
B
Select [Program/Change/Delete Quick
Dial].