Ricoh 1045 Fax Manual page 67

❒ You can select a line type for
each destination when the ISDN
Unit (option) or Extra G3 Inter-
face Unit (option) is installed.
Press [Line Select] to select a line
type.
Programing/Changing Key
Display
A Press [Key Display].
B Enter a Key Display.
Note
❒ The name which you pro-
gramed is shown. ⇒ P.73
"Entering Text"
C Press [OK].
The Key Display which you
programed is shown.
Selecting Title
A Press [Select Title].
B Select the title you want to pro-
gram.
C Press [OK].
Selecting TTI Name
A Press [Select TTI Name].
B Select [1st name] or [2nd name]
for registration.
C Press [OK].
Programing Label Insertion
A Press [Label Insertion].
B Select [ON] or [OFF].
Note
❒ If you select [OFF] or if you
want to insert only the re-
ceiver name, go to step F.
C Press [Change] at the right side
of the second or third line.
Quick Dial
3
59