Ricoh 1045 Fax Manual page 30

Faxing
❖ ❖ ❖ ❖ Area
Enter the area to be scanned. The
set document is scanned according
to the entered size regardless of its
actual size. ⇒ Chapter 7, "Register-
ing a Scan Size" in the Advanced
Features manual.
2
❖ ❖ ❖ ❖ Mixed Original Sizes
Select this to scan one by one the
size of originals loaded in the ADF.
For example, when A4 and B4 size
originals are sent together, usually
all are sent as B4 size. By selecting
Mixed Original Sizes, the machine
scans and sends each document ac-
cording to its size.
Note
❒ When using the Mixed Original
Sizes, the machine sends the
originals by memory transmis-
sion. ⇒ Chapter 4, "Transmis-
sion with Image Rotation" in the
Advanced Features manual.
❒ When using the Mixed Original
Sizes feature, rotation transmis-
sion is disabled.
A
Set the originals, and select any
scan settings you require.
Note
❒ When setting different size orig-
inals into the ADF, adjust the
document guide to the largest
original.
❒ Small originals may be sent at a
slight slant since they do not
match the document guide.
22
B
Press the [Scan Area] key.
The Scan Area menu is shown.
C
Select the scan area.
Specifying Standard Sizes
A Press the [Regular] key.
B Press the size of the originals
to be sent.
Note
❒ To cancel the specified stand-
ard size, press [Cancel]. The
display appears as in step B.
❒ 8 1/2 x 11 is LT, 8 1/2 x 14 is
LG, and 11 x 17 is DLT.
C Press [OK].
The specified size is shown.