Software Diagrams - ABB DCS 600 MultiDrive Manual

Hide thumbs Also See for DCS 600 MultiDrive:

Table of Contents

3.8 Software diagrams

Introduction

The designation of parameters and signals consist of a

group and a index.

01.02

23.05

Signal

Parameter

Group

Fig. 3.8/1:

Parameter/signal designation

The structure of the software is given. Changes of the

functions or pointers are realized through setting pa-

rameters.

This can be done via panel, DriveWindow (PC utility),

fieldbus or overriding control system.

Changed parameters or pointers are stored immediate-

ly in the non-volatile flash PROM.

All parameters can be transferred to the PC and be

stored on a data medium by using DriveWindow.

II F 3-6

3ADW000072R0501_DCS600_System_description_e_e

Index

On the following pages the simplified software struc-

ture is shown. Additionally there are specific tables for:

• Main Control Word (MCW)

• Auxiliary Control Words (ACW)

• Main Status Word (MSW)

• Auxiliary Status Word (ASW)

• Digital Inputs (Armature converter mode)

• Digital Inputs (Field converter mode)

• Digital Outputs (Armature converter mode)

• Digital Outputs (Field converter mode)

• Analogue Inputs (Armature converter mode)

Table of Contents