Malfunction Inspection - Ispring RO800 Series Manual

Malfunction Inspection

▪
Malfunction
No water output Is the water inlet valve turned on?
The filter was not installed correctly
The system is not connected to the
power
Less water The connection pipe is twisted or bent
output
The inlet valve opens too small
Low temperature especially in winter
The filter exceeds its service life
Long running Fitting's problem
non-stop
Domestic The drain is blocked
water cannot
be discharged
The filter exceeds its service life
Smell in water Long time no usage
Leakage The pipeline is not inserted
in connections into the bottom of the quick connector
www.123filter.com
Possible Issue
| (678) 261-7611 |
Possible solution
Turn on the water supply
Correct assemble the filter
Check the power
Check the connections
Open water inlet valve completely
When the temperature decreased, the
water purified amount will decrease
accordingly, which is a normal
phenomenon
Replace the filter
Close the inlet valve and turn off the
power, contact with the
professional worker to deal with
Close the inlet valve and turn off the
power, contact with the professional
worker to deal with
Replace the filter
The machine reproduces water for 20
minutes; make twice and then normal
usage
Reinstall the quick connector in the
correct way
support@123filter.com Page 14