Summary of Contents for Backyard Discovery Echo Heights
Page 1
For the most up to date assembly manual, to register your set, or to order replacement parts please visit www.backyarddiscovery.com SAVE THIS ASSEMBLY MANUAL FOR FUTURE REFERENCE IN THE EVENT THAT YOU NEED TO ORDER REPLACEMENT PARTS. Made in China | INS-2102316A-ECHO HEIGHTS-ENG...
Page 2
INSTALLATION SERVICES AVAILABLE! Need a helping hand? *Installation services are only available to U.S. customers. We do the heavy lifting, so you don’t have to! Visit www.goconfigure.com for more info! *Installation services are only available to U.S. customers.
Page 3
Owner’s Manual Please Read This Before Starting Assembly MISSING A PART? CALL US BEFORE GOING BACK TO THE STORE Please have the following information ready when you make your call: y fi...
Page 4
Limited Warranty Please read entire booklet completely before beginning the assembly process Please retain these instructions and your receipt for future reference. Keep them in a safe place where you can refer to them as needed. In order to provide you with the most service, it is required that you provide us with the part numbers when ordering parts.
Page 5
Owner’s Manual Operating Instructions and Safety Warnings WARNING: BURN HAZARD NOTE: Your Children’s Safety Is Our #1 Concern!
Page 6
Owner’s Manual Please Read This Before Starting Assembly Positioning Your Playhouse Suggested Playground Surfacing...
Page 7
Owner’s Manual Please Read This Before Starting Assembly APPENDIX A The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov specifi Specifi specifi Specifi diff...
Page 8
Owner’s Manual Instructions for Proper Maintenance IT IS IMPORTANT TO CHECK AND TIGHTEN ALL HARDWARE AT THE BEGINNING AND DURING THE SEASON AS THEY MAY LOOSEN DUE TO WOOD EXPANSION AND CONTRACTION. At the beginning of each play season Additional Maintenance ake and check depth of loose fi Twice a month during play season Disposal Instructions...
Page 9
Owner’s Manual Instructions for Proper Maintenance Your Backyard Discovery structure is designed and constructed of quality materials. As with all outdoor products it will weather and wear. To maximize the enjoyment, safety and life of your structure it is important that you properly maintain it.
Page 10
Owner’s Manual Assembly Tips Protrusion Hazard Incorrect Correct Proper Hardware Assembly Bolt and T-Nut Assembly Bolt and Barrel Nut Assembly Lag Assembly...
Page 11
Owner’s Manual Assembly Tips ASSEMBLY TIP: Keep and eye out for these boxes which will contain helpful pictures and information making the assembly process as quick and painless as possible. Sorting Wood Sorting Hardware NUT BARREL SCREW T-NUT WASHER FLAT BOLT HEX BOLT SCREW PWH...
Page 12
Electronics Safety Warnings Owner's Manual Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 13
Owner's Manual Tools Required for Installation...
Page 14
Owner's Manual Selecting the correct location for your play product is important for your children’s safety and the product’s longevity The safe play area refers to a zone extending 6'-7" (2m) beyond the play product on all sides, including the space above the play product.
Page 15
Owner's Manual LEFT FRONT UPRIGHT - W4L14880 1 3/8"x3 3/8"x62 3/8" (36x86x1584) (x1) RIGHT FRONT UPRIGHT - W4L14881 1 3/8"x3 3/8"x62 3/8" (36x86x1584) (x1) RIGHT REAR UPRIGHT - W4L14882 1 3/8"x3 3/8"x62 3/8" (36x86x1584) (x1) LEFT REAR UPRIGHT - W4L14883 1 3/8"x3 3/8"x35"...
Page 22
Owner's Manual A100314 "A" REVISION TAG A4M00555 (x1) 90° L-BRACKET - BLK (x8) A100028 HAND GRIP GREEN PLASTIC (x2) A4M00528 BYD ID TAG (MEDIUM) AGES 2 TO 10 (x1) A100361 PLASTIC SUNBURST (x2) A4M01047 L BRACKET 2.5x38x55x55 (x3) A6P00024 A6P00032 FAUCET KIT A6P00067 SURFACE MOUNT BASIN...
Page 23
Owner's Manual A4M00624 A4M00994 HINGE (DOOR, SPRING LOADED) HINGE (DOOR, NON-SPRING LOADED) (x1) (x1) A4M00933 DOOR STOP (x1) A4M01045 BELL ASSEMBLY (x1) A6P00391 6 FT SLIDE BED (x1)
Page 24
Owner's Manual A6P00330 INDUCTIVE BURNER KIT (x1) A6P00335 STOVE BASE (x1) A6P00338 FRY PAN (x1) A6P00331 BLENDER (x1) A6P00336 BOIL POT (x1) A6P00339 SPATULA (x1) A6P00337 POT/PAN LID (x2) A6P00340 LADLE (x1) A4M01150 VERTICAL ID PLATE (x1)
Page 25
SLIDE ASSEMBLY SLIDE BRACE - W4L13297 5/8"x3 3/8"x14 1/4" (16x86x362) A6P00391 6 FT SLIDE BED H100396 BOLT WH BLK H100379 T-NUT BLK 5/16x1/2 5/16 PLACE 'M77' SLIDE BRACE BOARD 1/2" FROM THE BOTTOM EDGE OF THE SLIDE BED. USING THE BOARD AS A TEMPLATE, MARK WHERE THE PILOT HOLES WILL BE DRILLED.
Page 26
SLIDE ASSEMBLY A6P00390 6 FT SLIDE RAIL RIGHT SLIDE BRACE - W4L13298 5/8"x3 3/8"x14 1/4" (16x86x362) A6P00389 6 FT SLIDE RAIL LEFT H100201 SCREW PFH BLK (16) 8x2-1/2 1. PLACE THE SLIDE RAIL ON FLAT SURFACE. STARTING AT THE BOTTOM, INSERT THE SLIDE BED INTO THE CHANNEL ON THE INSIDE OF THE RAIL.
Page 48
PLAYHOUSE ASSEMBLY FRONT RIGHT CORNER PANEL - W2A03151 REAR RIGHT CORNER PANEL - W2A03154 (x1) (x1) FRONT LEFT CORNER PANEL - W2A03157 REAR LEFT CORNER PANEL - W2A03160 (x1) (x1) STAND THE (4) CORNER WALL ASSEMBLIES AS SHOWN BELOW. LEFT BACK NOTE THE PROFILE OF THE WALL BOARDS.
Page 49
PLAYHOUSE ASSEMBLY H100385 SCREW PFH BLK (x12) LEFT CENTER PANEL - W2A03164 1 1/4"x18 7/8"x20 7/8" (32x478x536) (x1) BACK LEFT FRONT RIGHT...
Page 50
PLAYHOUSE ASSEMBLY H100385 SCREW PFH BLK (x12) REAR CENTER PANEL - W2A03163 1 1/4"x18 7/8"x20 7/8" (32x478x536) (x1) BACK LEFT RIGHT FRONT...
Page 51
PLAYHOUSE ASSEMBLY H100201 SCREW PFH BLK (x4) 8x2-1/2 HEADER ASSEMBLY - W2A03165 (x2) ALL INTERIOR SURFACES ARE FLUSH. LEFT BACK RIGHT FRONT...
Page 52
PLAYHOUSE ASSEMBLY H100387 SCREW PFH BLK (x32) 8x1-1/4 TIE STRAP - W4L14915 5/8"x3 3/8"x3 3/8" (16x86x86) (x8) INSTALL WITH THE EDGE SURFACE OF 'N1' FLUSH WITH THE END OF WALL BOARD, AS SHOWN. DRILL 1/8" - 3mm PILOT HOLE, THIS HOLE ONLY. THRU SIDING ONLY.
Page 67
A6P00330 INDUCTIVE BURNER KIT (x1) A6P00335 STOVE BASE (x1) NOTE: -DO NOT MIX OLD AND NEW BATTERIES. -DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC), OR RECHARGEABLE (NI-CAD, NI-MH, ETC.) BATTERIES. -NON-RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED. -ONLY BATTERIES OF THE SAME OR EQUIVALENT TYPE AS RECOMMENDED ARE TO BE USED.
Page 68
PLAYHOUSE ASSEMBLY H100797 SCREW PWH BLK (x4) A6P00335 STOVE BASE (x1) 1 3/4 in [45 mm]...
Page 75
FINAL ASSEMBLY H100382 SCREW PFH BLK H100408 SCREW PWH BLK (x8) 8x1 3/4 (x8) 8x1/2 PLAYHOUSE SUBASSEMBLY (x1) PICKET MAY NEED TO BE TEMPORARILY REMOVED TO ASSEMBLE THE HOUSE TO THE DECK. (ASSEMBLED PREVIOUSLY) PICKET MAY NEED TO BE TEMPORARILY REMOVED TO ASSEMBLE THE HOUSE TO THE DECK.
Page 76
FINAL ASSEMBLY H100202 SCREW PWH BLK (x2) 8x5/8 A4M00528 BYD ID TAG (MEDIUM) AGES 2 TO 10 (x1) 12 1/4 in [312 mm]...
Need help?
Do you have a question about the Echo Heights and is the answer not in the manual?
Questions and answers