Restore Default Screen; Figure 13: Pro3200 Web Server Restore Default Screen - Honeywell PRO3200 Installation And Configuration Manual

PRO3200 Installation
System Configuration via Web Interface
3. Specify the maximum period of time a session will remain open without user
4. Configure the auto-save timer. This feature, if enabled, automatically saves the
Editing a User
To edit a user record, click to select the user from the Username column and then click
Edit. Use the information provided in the previous section, "Adding a User," to edit
the record.
Deleting a User
To delete a user record, click to select the user from the Username column and then
click Delete.

4.8 Restore Default Screen

Click the Restore Default link on the navigation bar to restore the default
configuration values for the PRO3200:

Figure 13: PRO3200 Web Server Restore Default Screen

1. Click Restore Default to reload the default factory settings for all the
2. Click Restore Current to reload the current operational settings for all the
26 www.honeywell.com
activity. If the period expires without user activity, the user is logged out. After
specifying the time period, click Save Session Timer to save the setting.
hardware configuration in non-volatile Random Access Memory (RAM) at the
specified time interval. If you select Enable Auto-Save, then select a time
interval from the drop-down list, and click Save Auto-Save Timer to save the
setting.
configuration variables.
configuration variables.