Table of Contents
Advertisement
Quick change-over system centroteX S
Use
8.3 Removal of the quick change-over unit
60
A
Actuating key
B
Screw plug
C
Machine adapter
D
Quick change-over unit
If a break in production occurs that lasts for more than three
days, the quick change-over unit / the quick change-over
adapter must be removed and stored safely in accordance
with the manufacturer's stipulations [see operating instruc-
tions for the quick change-over unit / the quick change-over
adapter].
Special aids required:
Actuating key
INFORMATION
To simplify installation / removal of the quick change-
over unit on a horizontal spindle of the machine, Mon-
teq lifting tackle can be used [see operating instruc-
tions for the lifting tackle].
1.
As described in the »Preparing the machine for re-
moval« chapter, prepare for the following steps.
Order hotline +49 7144.907-333
Advertisement
Table of Contents
