Table of Contents
Advertisement
vario quick
Removal
6 Removal
6.1 Preparing the machine for removal
6.2 Removal of the product
6.2.1 Removal of the product from the clamping device
14
1.
Set the machine into set-up mode.
2.
Reduce the operating pressure to a minimum.
3.
Remove cutting tools and/or sharp objects from the
working area of the machine, or cover them.
4.
Remove operating and auxiliary materials as well as re-
maining processing materials and dispose of them in an
environmentally responsible manner.
Special aids needed:
Mounting aid
1.
As described in the »Preparing the machine for re-
moval« chapter, prepare for the following steps.
1.
Remove the stop screw from the base end-stop disc.
2.
Remove the clamping element [see operating instruc-
tions of the clamping device].
3.
Dismount the base end-stop disc [see operating instruc-
tions of the clamping device]. If necessary, use the
mounting aid.
Order hotline +49 7144.907-333
Advertisement
Table of Contents
