Table of Contents
Advertisement
hs dock
Use
8.3 Removal of the clamping device
A
Clamping device
A1
Fixing screws clamping device
If a break in production occurs that lasts for more than three
days, the clamping device must be removed and stored
safely in accordance with the manufacturer's stipulations
[see operating instructions for the clamping device].
1.
As described in the »Preparing the machine for re-
moval« chapter, prepare for the following steps.
2.
Attach any lifting gear that may be required.
3.
If necessary, fit the mounting aid onto a vertically sus-
pended spindle.
4.
Move the actuating unit into its rear limit stop position.
Order hotline +49 7144.907-333
61
Advertisement
Table of Contents
