Restore Factory Default Settings - NetComm NB8WVPN User Manual

Hide thumbs Also See for NB8WVPN:

Table of Contents

4.1 Restore Factory Default Settings

Restore Factory Defaults will reset the NB8WVPN to its factory default configuration.Occasions may present

themselves where you need to restore the factory defaults on your NB8WVPN such as:

•

You have lost your username and password and are unable to login to your NB8WVPN's web

configuration page;

You have purchased your NB8WVPN from someone else and need to reconfigure the device to work with

•

your ISP;

•

You are asked to perform a factory reset by NetComm Support staff

In order to restore your NB8WVPN to its factory default settings, please follow these steps:

Ensure that your NB8WVPN is powered on (for at least 10 seconds);

•

Use a paper clip or a pencil tip to depress the reset button for ten seconds and release. At this point, the

reset is in progress. Do not power off the unit at this point;

•

When indicator lights return to steady green, reset is complete. The default settings are now restored. The

entire process takes about 45 seconds to complete;

•

Once you have reset your NB8WVPN to its default settings you will be able to access the device's

configuration web interface using http://192.168.1.1 with username 'admin' and password 'admin';

YML8WVPN

8WVPN

www.netcomm.com.au

ADSL2+ VPN Router

NB8WVPN User Guide

Table of Contents